The ADS79xx is a 12-, 10-, 8-bit pin compatible multichannel analog-to-digital converter
family. The device comparison table shows all twelve devices from this product family.
The devices include a capacitor based SAR A/D converter with inherent sample and
The devices accept a wide analog supply range from 2.7 V to 5.25 V. Very low power
consumption makes these devices suitable for battery-powered and isolated power-supply
A wide 1.7-V to 5.25-V I/O supply range facilitates a glueless interface with the most
commonly used digital hosts. The serial interface is controlled by CS and
SCLK for easy connection with microprocessors and DSP.
The input signal is sampled with the falling edge of CS. It uses
SCLK for conversion, serial data output, and reading serial data in. The devices allow auto
sequencing of preselected channels or manual selection of a channel for the next conversion
There are two software selectable input ranges (0 V to VREF and 0
V to 2 × VREF), individually configurable GPIOs (four in case of the TSSOP
and one on the VQFN package devices), and two programmable alarm thresholds per channel. These
features make the devices suitable for most data acquisition applications.
The devices offer an attractive power-down feature. This is extremely useful for power
saving when the device is operated at lower conversion speeds.
The 16-, 12-channel devices from this family are available in a 38-pin TSSOP and 32 pin
VQFN package and the 4/8-channel devices are available in a 30-pin TSSOP and 24 pin VQFN