Home Power management Multi-channel ICs (PMICs)
NEW

TPS653861-Q1

ACTIVE

TPS653861-Q1

ACTIVE

Product details

TI functional safety category Functional Safety-Compliant Rating Automotive Operating temperature range (°C) to
TI functional safety category Functional Safety-Compliant Rating Automotive Operating temperature range (°C) to
HTSSOP (DCA) 48 101.25 mm² (12.5 mm × 8.1 mm)
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
    • Device temperature grade 0: –40°C to +150°C ambient operating temperature
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety-Compliant (targets, confirmed on device release)
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL D
    • Systematic capability and hardware integrity up to ASIL D
  • Input voltage range
    • 5 to 36V for initial power up
    • 3.5 to 36V full functionality after initial power up, limited operation to 2.3V
  • Output Supply Rails
    • Synchronous buck-boost preregulator with configurable spread-spectrum, 4.3V, 5 V, 6V or 6.8V and low IQ mode with the following options:
      • 2.8A in buck mode (option 0 variant)
      • 1.5A in buck mode (option 1 variant)
    • Four LDOs: 1.0V to 1.8V in 50mV steps, 2.5 V, 3.0V, 3.3V, 5V, bypass or voltage monitor mode. Each LDO with independent configurable current limit.
      • LDO1 and LDO2: Low IQ, up to 600mA
      • LDO3 and LDO4: low noise, low IQ, 1% accuracy, up to 225mA
    • Two protected LDOs for sensor or peripheral supplies, PLDO1 and PLDO2
      • Configurable for tracking mode or fixed output/VMON mode configurable for 1.0V to 1.8V in 50mV steps, 2.5V, 3.0V, 3.3V or 5V up to 200mA
      • Short-to-chassis (–2V) and supply (+36V) protection
  • Power sequence control:
    • Configurable power-up and down sequences (NVM default including output voltages)
    • Output rails, external voltage monitor and external enable signals can be included
  • Monitoring, protection and diagnostics
    • Undervoltage and overvoltage monitoring on all regulator outputs, battery voltage, and internal supplies
    • Two external voltage monitors (pins)
    • All regulator outputs protected with independent current limit
    • All regulators protected with independent overtemperature prewarning and shutdown
    • Watchdog: configurable for open and close window or question-answer
    • Error signal monitor (ESM) for monitoring MCU error output (PWM and level modes)
    • SAFE state for device and system protection
    • Clock monitor for internal oscillators
    • Analog and logic built-in self-test (BIST)
    • CRC on non-volatile memory (NVM), device configuration registers, and SPI communication
    • Diagnostic output pin: multiplexes analog and digital signals to MCU ADC and input
  • Compare module: 2 channels configurable as general purpose comparators or up to 4 channels of voltage monitoring
  • Timer (low IQ) for wake-up and measurement, 64µs to 203.6 days
  • SPI for configuration, status and error reporting
  • Reset output (NRST), two configurable safing outputs (SAFE_OUTx) for system safe state on detected faults interrupt output (NINT), and power good output (PGOOD)
  • Two configurable wake-up pins (WAKEx)
  • 48-Pin HTSSOP PowerPAD™ IC package
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
    • Device temperature grade 0: –40°C to +150°C ambient operating temperature
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety-Compliant (targets, confirmed on device release)
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL D
    • Systematic capability and hardware integrity up to ASIL D
  • Input voltage range
    • 5 to 36V for initial power up
    • 3.5 to 36V full functionality after initial power up, limited operation to 2.3V
  • Output Supply Rails
    • Synchronous buck-boost preregulator with configurable spread-spectrum, 4.3V, 5 V, 6V or 6.8V and low IQ mode with the following options:
      • 2.8A in buck mode (option 0 variant)
      • 1.5A in buck mode (option 1 variant)
    • Four LDOs: 1.0V to 1.8V in 50mV steps, 2.5 V, 3.0V, 3.3V, 5V, bypass or voltage monitor mode. Each LDO with independent configurable current limit.
      • LDO1 and LDO2: Low IQ, up to 600mA
      • LDO3 and LDO4: low noise, low IQ, 1% accuracy, up to 225mA
    • Two protected LDOs for sensor or peripheral supplies, PLDO1 and PLDO2
      • Configurable for tracking mode or fixed output/VMON mode configurable for 1.0V to 1.8V in 50mV steps, 2.5V, 3.0V, 3.3V or 5V up to 200mA
      • Short-to-chassis (–2V) and supply (+36V) protection
  • Power sequence control:
    • Configurable power-up and down sequences (NVM default including output voltages)
    • Output rails, external voltage monitor and external enable signals can be included
  • Monitoring, protection and diagnostics
    • Undervoltage and overvoltage monitoring on all regulator outputs, battery voltage, and internal supplies
    • Two external voltage monitors (pins)
    • All regulator outputs protected with independent current limit
    • All regulators protected with independent overtemperature prewarning and shutdown
    • Watchdog: configurable for open and close window or question-answer
    • Error signal monitor (ESM) for monitoring MCU error output (PWM and level modes)
    • SAFE state for device and system protection
    • Clock monitor for internal oscillators
    • Analog and logic built-in self-test (BIST)
    • CRC on non-volatile memory (NVM), device configuration registers, and SPI communication
    • Diagnostic output pin: multiplexes analog and digital signals to MCU ADC and input
  • Compare module: 2 channels configurable as general purpose comparators or up to 4 channels of voltage monitoring
  • Timer (low IQ) for wake-up and measurement, 64µs to 203.6 days
  • SPI for configuration, status and error reporting
  • Reset output (NRST), two configurable safing outputs (SAFE_OUTx) for system safe state on detected faults interrupt output (NINT), and power good output (PGOOD)
  • Two configurable wake-up pins (WAKEx)
  • 48-Pin HTSSOP PowerPAD™ IC package

The TPS65386x-Q1 device is a multirail power supply designed to supply microcontrollers, sensors, transceivers and peripherals in safety relevant applications.

The TPS65386x-Q1 device is a multirail power supply designed to supply microcontrollers, sensors, transceivers and peripherals in safety relevant applications.

Download View video with transcript Video

Technical documentation

No results found. Please clear your search and try again.
View all 1
Top documentation Type Title Format options Date
* Data sheet TPS653860/61-Q1 Power Management IC For Safety-Relevant Applications datasheet (Rev. A) PDF | HTML Oct 31, 2024

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Driver or library

PMIC-RTOS-DRIVERS — RTOS and Bare-Metal Drivers for Texas Instruments Power Managment ICs

This low-level driver package enables users to dynamically configure hardware and safety mechanisms of Texas Instruments functional safety compliant PMICs and assists in achieving functional safety goals.
Supported products & hardware
Driver or library

PMIC-RTOS-DRIVERS-SAFETY-DOCS — Functional Safety documentation for PMIC-RTOS-DRIVERS

Functional Safety documentation for PMIC-RTOS-DRIVERS
Supported products & hardware
GUI for evaluation module (EVM)

TPS65386X-GUI — TPS65386x-GUI Graphical User Interface (GUI)

Graphical user interface used to communicate with the TPS65386x-Q1 PMIC through SPI and evaluate device functionality and performance.
Supported products & hardware
Package Pins CAD symbols, footprints & 3D models
HTSSOP (DCA) 48 Ultra Librarian

Ordering & quality

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos