Home Power management Linear & low-dropout (LDO) regulators
NEW

TPS7B7802-Q1

PREVIEW

Automotive, 40V, dual-channel antenna LDO with I2C interface

TPS7B7802-Q1

PREVIEW

Product details

Rating Automotive Operating temperature range (°C) to
Rating Automotive Operating temperature range (°C) to
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
    • Device HBM ESD classification 2
    • Device CDM ESD classification C4B
  • Single and dual-channel LDO with current sense and adjustable current-limit
  • 4.5V to 40V wide input voltage range, 45V load dump
  • Power switch mode when tying FB to GND
  • 1.5V to 20V adjustable output voltage
  • Up to 300mA output current per channel
  • Adjustable current-limit with external resistor
  • High accuracy current-sense to detect antenna open condition at low current without further calibration
  • High power-supply rejection ratio: typical 73dB at 100Hz
  • Integrated reverse-polarity protection, down to –40V and no need for external diode
  • 500mV maximum dropout voltage at 100mA load
  • Stable with output capacitor in 2.2µF to 100µF range (ESR 1mΩ to 5Ω)
  • Integrated protection and diagnostics:
    • Thermal shutdown
    • Undervoltage lockout (UVLO)
    • Short-circuit protection
    • Reverse battery polarity protection
    • Reverse-current protection
    • Output short-to-battery protection
    • Output inductive load clamp
    • Multiplexing current sense between channels and devices
    • Ability to distinguish all faults with current sense
  • 16-pin HTSSOP PowerPAD™ package
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
    • Device HBM ESD classification 2
    • Device CDM ESD classification C4B
  • Single and dual-channel LDO with current sense and adjustable current-limit
  • 4.5V to 40V wide input voltage range, 45V load dump
  • Power switch mode when tying FB to GND
  • 1.5V to 20V adjustable output voltage
  • Up to 300mA output current per channel
  • Adjustable current-limit with external resistor
  • High accuracy current-sense to detect antenna open condition at low current without further calibration
  • High power-supply rejection ratio: typical 73dB at 100Hz
  • Integrated reverse-polarity protection, down to –40V and no need for external diode
  • 500mV maximum dropout voltage at 100mA load
  • Stable with output capacitor in 2.2µF to 100µF range (ESR 1mΩ to 5Ω)
  • Integrated protection and diagnostics:
    • Thermal shutdown
    • Undervoltage lockout (UVLO)
    • Short-circuit protection
    • Reverse battery polarity protection
    • Reverse-current protection
    • Output short-to-battery protection
    • Output inductive load clamp
    • Multiplexing current sense between channels and devices
    • Ability to distinguish all faults with current sense
  • 16-pin HTSSOP PowerPAD™ package

The TPS7B770x-Q1 family of devices feature a single and dual, high-voltage low-dropout regulator (LDO) with current sensing, designed to operate with a wide input-voltage range from 4.5V to 40V (45V load dump protection). These devices provide power to the low-noise amplifiers of the active antenna through a coax cable with 300mA per channel current. Each channel also provides an adjustable output voltage from 1.5V to 20V.

These devices provide diagnostics through the current sense and error pins. To monitor the load current, a high-side current-sense circuitry provides a proportional analog output to the sensed load current. The accurate current sense allows detection of open, normal, and short-circuit conditions without the need for further calibration. Multiplex the current sense between channels and devices to save analog-to-digital converter (ADC) resources. Each channel also implements adjustable current limit with an external resistor.

An integrated reverse polarity diode eliminates the need for an external diode. These devices feature standard thermal shutdown, short-to-battery protection on the output, and reverse current protection. Each channel has internal inductive clamp protection on the output during inductive switch off.

These devices operate over a –40°C to +125°C ambient temperature range.

The TPS7B770x-Q1 family of devices feature a single and dual, high-voltage low-dropout regulator (LDO) with current sensing, designed to operate with a wide input-voltage range from 4.5V to 40V (45V load dump protection). These devices provide power to the low-noise amplifiers of the active antenna through a coax cable with 300mA per channel current. Each channel also provides an adjustable output voltage from 1.5V to 20V.

These devices provide diagnostics through the current sense and error pins. To monitor the load current, a high-side current-sense circuitry provides a proportional analog output to the sensed load current. The accurate current sense allows detection of open, normal, and short-circuit conditions without the need for further calibration. Multiplex the current sense between channels and devices to save analog-to-digital converter (ADC) resources. Each channel also implements adjustable current limit with an external resistor.

An integrated reverse polarity diode eliminates the need for an external diode. These devices feature standard thermal shutdown, short-to-battery protection on the output, and reverse current protection. Each channel has internal inductive clamp protection on the output during inductive switch off.

These devices operate over a –40°C to +125°C ambient temperature range.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Top documentation Type Title Format options Date
* Data sheet TPS7B7802-Q1 Automotive, 500mA, Dual-Channel, Antenna LDO With I2 C Diagnostics datasheet PDF | HTML 05 Jun 2026

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos