Top

Product details

Parameters

Type Passive switch Function USB2 USB speed (Mbps) 480 Number of channels (#) 2 Supply voltage (Max) (V) 6.5 Supply voltage (Min) (V) 3 Ron (Typ) (Ohms) 8 Input/ouput voltage (Min) (V) 0 Input/ouput voltage (Max) (V) 3.6 Configuration 1:2 SPDT Features USB 2.0, UART, BCv1.1 Charger Detection, I2C Interface, JIG and BOOT Support, Attach and Detach Interrupt, Surge Protection Rating Catalog Operating temperature range (C) -40 to 85 ICC (Max) (uA) 75 ESD HBM (Typ) (kV) 5 Bandwidth (MHz) 920 open-in-new Find other USB redrivers & multiplexers

Package | Pins | Size

UQFN (RSV) 16 5 mm² 2.6 x 1.8 open-in-new Find other USB redrivers & multiplexers

Features

  • Switch Matrix
    • USB
    • UART Supports USB 2.0 High Speed
  • Charger Detection
    • USB BCDv1.1 Compliant
    • VBUS Detection
    • Data Contact Detection
    • Primary and Secondary Detection
  • Compatible Accessories
    • USB Chargers (DCP, CDP)
    • Factory Cable
  • Additional Features
    • I2C Interface with Host Processor
    • Switches Controlled by Automatic Detection or Manual
      Control
    • Interrupts Generated for Plug/Unplug
    • Support Control Signals used In Manufacturing (JIG, BOOT)
  • Max Voltage
    • 28V VBUS rating
  • ESD Performance Tested Per JESD 22
    • 5000-V Human-Body Model
      (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
  • IEC ESD Performance
    • ±8kV Contact Discharge (IEC 61000-4-2) for
      VBUS/DP_CON/DM_CON/ID_CON to GND
  • Surge Protection on VBUS/DP_CON/DM_CON
    • USB Connector Pins Without External Component
open-in-new Find other USB redrivers & multiplexers

Description

The TSU6111A is a high performance differential autonomous SP2T switch with impedance detection. The switch supports the detection of various accessories that are attached through DP, DM, and ID. The charger detection satisfies USB charger specification v1.1 and VBUS_IN has a 28V tolerance to eliminate the need for external protection. Power for this device is supplied through VBAT of the system or throughVBUS_IN when attached to a charger.

The SP2T switch is controlled by the automatic detection logic or through manual configuration of the I2C. JIG and BOOT pins are used when a USB or UART JIG cable is used to test the device in the development and manufacturing. TSU6111A has open-drain JIG output (active low).

open-in-new Find other USB redrivers & multiplexers
Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet USB Port SP2T Switch Supports USB & UART datasheet (Rev. A) Aug. 06, 2012
Application note High-Speed Interface Layout Guidelines (Rev. H) Oct. 11, 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Design tools & simulation

SIMULATION MODEL Download
SCDM148.ZIP (250 KB) - HSpice Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOL Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide

CAD/CAE symbols

Package Pins Download
UQFN (RSV) 16 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos