SN54BCT541

ACTIVO

Búferes octales y controladores con salidas de 3 estados

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat SN54BCT541, SN74BCT541A datasheet (Rev. E) (Inglés)

SN54BCT541

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Technology family

BCT

Rating

Military

Operating temperature range (°C)

-55 to 125

Technology family

BCT

Rating

Military

Operating temperature range (°C)

-55 to 125

CDIP (J)

20

167.464 mm² (— mm × — mm)

LCCC (FK)

20

79.0321 mm² (— mm × — mm)

Operating Voltage Range of 4.5 V to 5.5 V
State-of-the-Art BiCMOS Design Significantly Reduces I_CCZ
3-State Outputs Drive Bus Lines or Buffer Memory Address Registers
P-N-P Inputs Reduce DC Loading
Data Flow-Through Pinout (All Inputs on Opposite Side From Outputs)

Operating Voltage Range of 4.5 V to 5.5 V
State-of-the-Art BiCMOS Design Significantly Reduces I_CCZ
3-State Outputs Drive Bus Lines or Buffer Memory Address Registers
P-N-P Inputs Reduce DC Loading
Data Flow-Through Pinout (All Inputs on Opposite Side From Outputs)

The SN54BCT541 and SN74BCT541A octal buffers and line drivers are ideal for driving bus lines or buffering memory-address registers. The devices feature inputs and outputs on opposite sides of the package to facilitate printed-circuit-board layout.

The 3-state control gate is a 2-input AND gate with active-low inputs so that, if either output-enable (OE1\ or OE2\) input is high, all eight outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN54BCT541 and SN74BCT541A octal buffers and line drivers are ideal for driving bus lines or buffering memory-address registers. The devices feature inputs and outputs on opposite sides of the package to facilitate printed-circuit-board layout.

The 3-state control gate is a 2-input AND gate with active-low inputs so that, if either output-enable (OE1\ or OE2\) input is high, all eight outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

filter

Buscar otro/a Búferes y controladores no inversores

Descargar

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Pin por pin con la misma funcionalidad que el dispositivo comparado

SN74HCT541

ACTIVO

Búferes de 8 canales, 4.5 V a 5.5 V con entradas CMOS compatibles con TTL y salidas de 3 estados Voltage range 4.5V to 5.5V, average propagation delay 22ns, average drive strength 4mA

Funcionalidad similar a la del dispositivo comparado

CD74HCT541

ACTIVO

Búferes de 8 canales, 4.5 V a 5.5 V con entradas CMOS compatibles con TTL y salidas de 3 estados Voltage range 4.5V to 5.5V, average propagation delay 22ns, average drive strength 4mA

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	SN54BCT541, SN74BCT541A datasheet (Rev. E)			11/03/2003
*	SMD	SN54BCT541 SMD 5962-90749			21/06/2016

SN54BCT541

Búferes octales y controladores con salidas de 3 estados

SN54BCT541

Detalles del producto

Productos similares que pueden interesarle

Pin por pin con la misma funcionalidad que el dispositivo comparado

Funcionalidad similar a la del dispositivo comparado

Documentación técnica

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI