56-pin (RTQ) package image

LMK04610RTQT 現行

具有雙 PLL 的超低雜訊、低功耗且符合 JESD204B 標準的時鐘抖動清除器

現行 custom-reels 客製 可提供客製捲盤

定價

數量 價格
+

額外包裝數量 | 包裝類型選項 這些產品完全相同,但包裝類型不同

LMK04610RTQR 現行 custom-reels 客製 可提供客製捲盤
包裝數量 | 運送包裝 2,000 | LARGE T&R
庫存
數量 | 價格 1ku | +

品質資訊

等級 Catalog
RoHS
REACH
引腳鍍層 / 焊球材質 NIPDAU
MSL 等級 / 迴焊峰值 Level-3-260C-168 HR
品質、可靠性
及包裝資訊

內含資訊:

  • RoHS
  • REACH
  • 產品標記
  • 引腳鍍層 / 焊球材質
  • MSL 等級 / 迴焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中可靠性監測
檢視或下載
其他製造資訊

內含資訊:

  • 晶圓廠位置
  • 組裝地點
檢視

出口分類

*僅供參考

  • 美國 ECCN:EAR99

封裝資訊

封裝 | 引腳 VQFN (RTQ) | 56
作業溫度範圍 (°C) -40 to 85
包裝數量 | 運送包裝 250 | SMALL T&R

LMK04610 的特色

  • Dual-loop PLL architecture
  • Ultra low noise (10 kHz to 20 MHz):
    • 48-fs RMS jitter at 1966.08 MHz
    • 50-fs RMS jitter at 983.04 MHz
    • 61-fs RMS jitter at 122.88 MHz
  • –165-dBc/Hz noise floor at 122.88 MHz
  • JESD204B support
    • Single shot, pulsed, and continuous SYSREF
  • 10 differential output clocks in 8 frequency groups
    • Programmable output swing between 700 mVpp to 1600 mVpp
    • Each output pair can be configured to SYSREF clock output
    • 16-bit channel divider
    • Minimum SYSREF frequency of 25 kHz
    • Maximum output frequency of 2 GHz
    • Precision digital delay, dynamically adjustable
      • Digital delay (DDLY) of ½ × clock distribution path frequency (2 GHz maximum)
    • 60-ps step analog delay
    • 50% duty cycle output divides, 1 to 65535
      (even and odd)
  • Two reference inputs
    • Holdover mode, when inputs are lost
    • Automatic and manual switch-over modes
    • Loss-of-signal (LOS) detection
  • 0.88-W typical power consumption with 10 outputs active
  • Operates typically from a 1.8-V (outputs, inputs) and 3.3-V supply (digital, PLL1, PLL2_OSC, PLL2 core)
  • Fully integrated programmable loop filter
  • PLL2
    • PLL2 phase detector rate up to 250 MHz
    • OSCin frequency-doubler
    • Integrated low-noise VCO
  • Internal power conditioning: better than –80 dBc PSRR on VDDO for 122.88-MHz differential outputs
  • 3- or 4-wire SPI interface (4-wire is default)
  • –40ºC to +85ºC industrial ambient temperature
  • Supports 105ºC PCB temperature (measured at thermal pad)
  • LMK04610: 8-mm × 8-mm VQFN-56 package with 0.5-mm pitch

LMK04610 的說明

The LMK0461x device family is the industry’s highest performance and lowest power jitter cleaner with JESD204B support.

定價

數量 價格
+

額外包裝數量 | 包裝類型選項 這些產品完全相同,但包裝類型不同

LMK04610RTQR 現行 custom-reels 客製 可提供客製捲盤
包裝數量 | 運送包裝 2,000 | LARGE T&R
庫存
數量 | 價格 1ku | +

包裝類型選項

您可依零件數量選擇不同包裝類型選項,包含完整捲盤、客製化捲盤、剪切捲帶、承載管或盤。

客製化捲盤是從一個捲盤上剪切下來的連續剪切捲帶,以維持批次和日期代碼可追溯性,依要求剪切至確切數量。依照業界標準,銅墊片會在剪切捲帶兩側連接 18 英吋前後導帶,以直接送至自動組裝機器。針對客製化捲盤訂單,TI 將酌收捲帶封裝費用。

剪切捲帶是從捲盤剪切下來的一段捲帶。TI 可能使用多條剪切捲帶或承載盒,以滿足訂單要求數量。

TI 常以盒裝或管裝、盤裝方式運送承載管裝置,視現有庫存而定。所有捲帶、管或樣本盒之封裝,皆符合公司內部靜電放電與防潮保護包裝要求。

進一步了解

可提供批次和日期代碼選擇

在購物車中加入數量,並開始結帳流程以檢視可用選項,從現有庫存中選擇批次或日期代碼。

進一步了解