LM3253EVM

Evaluation Board for the LM3253

LM3253EVM

Order now

Overview

The LM3253 is a DC-DC converter optimized for powering multi-mode 2G/3G/4G RF power amplifiers (PAs) from a single Lithium-Ion cell. The LM3253 steps down an input voltage from 2.7V to 5.5V to a dynamically adjustable output voltage of 0.4V to 3.6V. The output voltage is set through a VCON analog input that adjusts the output voltage to ensure efficient operation at all power levels of the RF PA. The LM3253 is optimized for USB datacard applications.

The LM3253 operates in constant frequency PWM mode producing a small and predictable amount of output voltage ripple. This enables best ECTEL power requirements in GMSK and EDGE spectral compliance, with the minimal amount of filtering and excess headroom.

Features
  • High-Efficiency PFM and PWM modes with Internal Synchronous Rectification
  • Analog Bypass Function with Low Dropout Resistance (45 mΩ typ.)
  • Dynamically Adjustable Output Voltage, 0.4V to 3.6V (typ.), in PFM and PWM Modes
  • 3.0A Maximum Load Current in PWM Mode
  • 2.7 MHz (average) PWM Switching Frequency
  • Modulated Switching Frequency to aid Rx Band Compliance
  • Operates from a Single Li-ion Cell (2.7V to 5.5V)
  • ACB reduces inductor requirements and size
  • Minimum total solution size by using small footprint and case size inductor and capacitors
  • 16-bump thin micro SMD Package
  • Current and Thermal Overload Protection
Buck converters (integrated switch)
LM3253 High Current Step Down DC/DC converter for 2G/3G/4G Power Amplifiers LM3253-C High Current Step Down DC/DC converter for 2G/3G/4G Power Amplifiers
Download View video with transcript Video

Order & start development

Evaluation board

LM3253EVM/NOPB — Evaluation Board for the LM3253

Log in to order
In stock / Out of stock
Limit:
Not available on TI.com
TI's Standard Terms and Conditions for Evaluation Items apply.

Technical documentation

No results found. Please clear your search and try again.
View all 1
Type Title Date
Certificate LM3253EVM/NOPB EU Declaration of Conformity (DoC) 02 Jan 2019

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​

Videos