TPS40041EVM-001
TPS40041 5V Input, 1.8V Output, 6A Evaluation Module
TPS40041EVM-001
Overview
The TPS40041EVM-001 evaluation module (EVM) is a synchronous buck converter providing a fixed 1.8 V output at up to 6 A from a 5 V input bus or 3 A from a 3.3 V input. The EVM is designed to start up from a single supply, so no additional bias voltage is required for start-up. The module uses the TPS40041 Reduced Pin Count Low-Voltage Synchronous Buck Controller. TPS40041EVM-001 is designed to use a regulated 5 V (4.5 V to 5.5 V) or 3.3 V (3.0 V to 3.6 V) bus to produce a medium current, regulated 1.8 V output at up to 6 A of load current. TPS40041EVM-001 is designed to demonstrate the TPS40041 in a typical regulated bus to low-voltage application while providing a number of test points to evaluate the performance of the TPS40041 in a given application. The EVM can be modified to support output voltages from 0.9 V to 2.5 V by changing a single set resistor.
Features
- 3.0 V to 5.5 V input range
- 1.8 V fixed output, adjustable with single resistor
- 6 ADC steady state output current (3 A at 3.3 V input)
- 600 kHz switching frequency (fixed by TPS40041)
- Single SO-8 dual MOSFET for both main switch and synchronous rectifier
- Double sided 2 layer PCB with all components on top side
- Active converter uses less than 1 square inch < 1.0" x 1.0"
- Convenient test points for probing switching waveforms and non-invasive loop response testing
Order & start development
TPS40041EVM-001 – 5V Input, 1.8V Output, 6A Evaluation Module
Technical documentation
Type | Title | Date | |
---|---|---|---|
* | User guide | A 5-V Input, 1.8-V Output, 6-A Synchronous Buck Converter | Apr. 10, 2006 |
More literature | TPS40041EVM-001 EU Declaration of Conformity (DoC) | Jan. 02, 2019 | |
Technical articles | Power Tips: Simple PSRR measurement with a frequency analyzer | May 25, 2016 | |
Datasheet | Low Pin Count, Low VIN (2.5V to 5.5V Synchronous Buck DC-to-DC Controller datasheet (Rev. D) | Dec. 12, 2007 |
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.