The LM3492 integrates a boost converter and a two-channel current regulator to implement a high efficient and cost effective LED driver for driving two individually dimmable LED strings with a maximum power of 15W and an output voltage of up to 65V. The boost converter employs a proprietary Projected- On-Time control method to give a fast transient response with no compensation required, and a nearly constant switching frequency programmable from 200 kHz to 1 MHz. The application circuit is stable with ceramic capacitors and produces no audible noise on dimming.
This design is for the LM3492 which drives 2 LED strings, each of which can consist of 10 LEDs running at 150 mA and the forward voltage of each LED is typically 3.8V. The input voltage is from 9V to 16V. The evaluation board schematic, PCB layout, Bill of Materials, and circuit design descriptions are shown. Typical performance and operating waveforms are also provided for reference.
| Tipo | Título | Descargar la versión más reciente en inglés | Fecha | ||
|---|---|---|---|---|---|
| Certificado | LM3492EVAL/NOPB EU Declaration of Conformity (DoC) | 2/01/2019 | |||
| Guía del usuario | AN-2056 LM3492 Evaluation Board Reference Design (Rev. B) | 1/05/2013 |
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene alguna pregunta sobre la calidad, el empaquetado o el pedido de productos de TI, consulte el servicio de asistencia de TI.