BQ76925EVM

3~6 시리즈 리튬 이온 셀을 위한 BQ76925 아날로그 프론트 엔드용 평가 모듈

BQ76925EVM

지금 주문하기

개요

The BQ76925EVM is an evaluation module for BQ76925, analog front end for 3 to 6 Series Lithium-Ion Cells. The user's guide for the BQ76925EVM evaluation module can assist designers in their evaluation of the BQ76925. This guide discusses setup and operation of the module and contains schematics, bill of materials, and printed-circuit board layout. Before designing a battery management system with the BQ76925, designers are advised to read the BQ76925 data sheet. If a designer wants to communicate with this EVM from a Windows-based PC, a separate USB interface adapter EVM is recommended. The USB-TO-GPIO adapter serves as an interface adapter or a bridge between a host PC (IBM compatible) and one or multiple slave devices via a standard type-A to mini-B USB cable. The USB-TO-GPIO Adapter is listed below in the related tools section.

특징
  • Evaluation module (EVM) for bq76925
  • One bq76925 and one MSP430F2122 device with associated support circuitry
  • Support for 3-to 6-series connected cells
  • bq76925 circuit is jumper configurable for internal or external 3.3-V source
  • Supports nominal 4.2-V to 26.4-V pack voltages, 30 V maximum
  • 20-A continuous charge/discharge current rating
  • Onboard thermistor for temperature measurement
  • Transient voltage protection of PACK± terminals
  • Connector for USB-TO-GPIO Adapter
  • Test points for monitoring of cell voltages and other important circuit nets
  • EVM design files in Mentor Graphics™ PADs™ 2009 format available on request
  • Gerber files available on request
배터리 모니터 및 밸런서
BQ76925 3~6 직렬 리튬 이온 셀을 위한 아날로그 프론트 엔드
다운로드 스크립트와 함께 비디오 보기 비디오

주문 및 개발 시작

평가 보드

BQ76925EVM — Evaluation Module for BQ76925 Analog Front End for 3 to 6 Series Lithium-Ion Cells

지원되는 제품 및 하드웨어
재고 있음
제한:
TI.com에 재고 없음
TI.com에서 구매할 수 없음

BQ76925EVM Evaluation Module for BQ76925 Analog Front End for 3 to 6 Series Lithium-Ion Cells

close
버전: null
출시 날짜:
지원 소프트웨어

SLUC268 — bq76925 Evaluation Software

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
배터리 모니터 및 밸런서
BQ76925 3~6 직렬 리튬 이온 셀을 위한 아날로그 프론트 엔드
하드웨어 개발
평가 보드
BQ76925EVM 3~6 시리즈 리튬 이온 셀을 위한 BQ76925 아날로그 프론트 엔드용 평가 모듈
다운로드 옵션

SLUC268 bq76925 Evaluation Software

close
버전: 01.00.00.00
출시 날짜: 2011. 8. 14
제품
배터리 모니터 및 밸런서
BQ76925 3~6 직렬 리튬 이온 셀을 위한 아날로그 프론트 엔드
하드웨어 개발
평가 보드
BQ76925EVM 3~6 시리즈 리튬 이온 셀을 위한 BQ76925 아날로그 프론트 엔드용 평가 모듈

출시 정보

The design resource accessed as www.ti.com/lit/zip/sluc268 or www.ti.com/lit/xx/sluc268/sluc268.zip has been migrated to a new user experience at www.ti.com/tool/download/SLUC268. Please update any bookmarks accordingly.
펌웨어

SLUC581 — bq76925 Example Code

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
배터리 모니터 및 밸런서
BQ76925 3~6 직렬 리튬 이온 셀을 위한 아날로그 프론트 엔드
하드웨어 개발
평가 보드
BQ76925EVM 3~6 시리즈 리튬 이온 셀을 위한 BQ76925 아날로그 프론트 엔드용 평가 모듈
다운로드 옵션

SLUC581 bq76925 Example Code

close
버전: 01.00.00.00
출시 날짜: 2015. 3. 25
제품
배터리 모니터 및 밸런서
BQ76925 3~6 직렬 리튬 이온 셀을 위한 아날로그 프론트 엔드
하드웨어 개발
평가 보드
BQ76925EVM 3~6 시리즈 리튬 이온 셀을 위한 BQ76925 아날로그 프론트 엔드용 평가 모듈

출시 정보

The design resource accessed as www.ti.com/lit/zip/sluc581 or www.ti.com/lit/xx/sluc581/sluc581.zip has been migrated to a new user experience at www.ti.com/tool/download/SLUC581. Please update any bookmarks accordingly.
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기
유형 직함 최신 영어 버전 다운로드 날짜
사용 설명서 bq76925EVM Evaluation Module (Rev. A) 2019. 2. 11
인증서 BQ76925EVM EU Declaration of Conformity (DoC) 2019. 1. 2

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요.