GASGAUGECHEM-SW
가스 게이지 화학 업데이터
GASGAUGECHEM-SW
개요
화학 업데이터 설치 프로그램에는 배터리 팩에 대해 정확하거나 가장 가까운 화학 식별 파일을 선택하기 위해 bqEvaluation / bqEVSW / bqEASY 도구에서 사용하는 데이터가 포함되어 있습니다.
배터리 관리 스튜디오(bqStudio) 화학 업데이트 zip 파일에는 bqStudio에서 배터리 팩에 대해 정확하거나 가장 가까운 화학 식별 파일을 선택하는 데 사용하는 데이터가 포함되어 있습니다. 최신 bqStudio 화학 업데이트 zip 파일에는 bqStudio의 업데이트된 버전이 필요할 수 있습니다. 이전 버전의 bqStudio는 이전 버전의 화학 업데이트 zip 파일과만 호환될 수 있습니다. 자세한 내용은 배터리 관리 스튜디오(bqStudio) 및 화학 업데이터 다운로드 페이지의 릴리스 노트를 읽어보십시오.
다운로드
GASGAUGECHEM-SW — Gas Gauge Chemistry Updater
지원되는 제품 및 하드웨어
제품
배터리 연료 게이지
GASGAUGECHEM-SW — Gas Gauge Chemistry Updater
Chemistry Updater for Battery Management Studio (bqStudio) software
Chemistry Updater installer for bq Evaluation/bqEasy software
제품
배터리 연료 게이지
문서
출시 정보
| Important Note: The latest chemistry updater for bqStudio requires bqStudio 1.3.86 or higher. |
Instructions for bqStudio Chemistry database update:
- 1. Download the "bqStudio Chemistry Update zip" file and save with extension *.zip
- 2. Connect an impedance track(IT) enabled gauge to the PC and open Battery Management Studio(bqStudio). bqStudio must autodetect the gauge. Alternatively select impedance track enabled gauge from selection list.
- 3. From bqStudio "Help" menu select "Update Chemistry". When prompted point bqStudio to the downloaded zip file. Upon successful update, a confirmation message will be shown.
- 4. For chemistry updaters later than 1090, you must use bqStudio version 1.3.125 Build 10 or later.
Instructions for bqEVSW Chemistry database update:
- Run the installer to update the chemistry database used by bq Evaluation / bqEasy software
필요할 수 있는 추가 리소스
SLUC261 — Gas Gauge Chemistry Updater Setup v7.82
지원되는 제품 및 하드웨어
제품
배터리 연료 게이지
SLUC261 — Gas Gauge Chemistry Updater Setup v7.82
제품
배터리 연료 게이지
출시 정보
BQ27Z746-DEVICE-FW — Firmware for BQ27Z746 family of gauges
지원되는 제품 및 하드웨어
제품
배터리 연료 게이지
하드웨어 개발
평가 보드
BQ27Z746-DEVICE-FW — Firmware for BQ27Z746 family of gauges
제품
배터리 연료 게이지
하드웨어 개발
평가 보드
문서
Technical Reference Manual
User Guide
출시 정보
Overview
The BQ27Z746-DEVICE-FW is a firmware (FW)-only release that can be flashed onto any existing hardware such as BQ27Z746 product. The firmware incorporates the patented Impedance Track™ technology to create a pack-based solution that provides a rich array of features for gas gauging, protection, differential battery sensing analog output, and authentication for 1-series cell li-ion and li-polymer battery packs.
Using its integrated high-performance analog peripherals, the BQ27Z746-DEVICE-FW firmware enables the device and measures and maintains an accurate record of available capacity, voltage, current, temperature, and other critical parameters in li-ion or li-polymer batteries, and reports this information to the system host controller. The integrated protection provide safety protection against Over Voltage (OVP), Under Voltage (UVP), Over Current in Charge/Discharge (OCC/OCD), Short Circuit Discharge (SCD), and Battery Sensing Protections (BCP, BCN, BDP and BDN).
SHA-2 authentication, with secure memory for authentication keys, enables identification of genuine battery packs.
BQ27Z746-DEVICE-FW is usable on any previous version of the BQ27Z746 hardware.
Features
Supports pack-side gauging including enhanced state of health (SOH) algorithm
Fast QMax update option based on predicted OCV
SHA-256 authentication responder for increased battery pack security
Sophisticated charge algorithms:
- JEITA
- Enhanced charging
- RSOC() charging compensation option
Low current modes options:
- Sleep
- Ship
- Shelf
- Shutdown
새 소식
- New features and bug fixes to BQ27Z746 firmware.
기술 자료
| 유형 | 직함 | 최신 영어 버전 다운로드 | 날짜 | ||
|---|---|---|---|---|---|
| 사용 설명서 | Update the Chemistry DB in bqEVSW, bqEasy and Batt. Mgmt. Studio (bqStudio) | 2020. 4. 15 |