TPSF12CX-MATHCAD
TPSF12C1/-Q1 및 TPSF12C3/-Q1 공통 모드 AEF Mathcad 설계 툴
TPSF12CX-MATHCAD
개요
이 MathCAD 파일은 특히 TI의 공통 모드(CM) AEF IC TPSF12C1/3/-Q1 제품군과 관련하여 전압 감지 전류 주입 AEF 회로의 안정성을 예측하고 부품 선택을 지원하기 위해 제공됩니다. 이 모델은 대부분의 기생 효과가 포함되어 있으며 시뮬레이션, 벤치 측정 및 미세 튜닝 전에 루프 게인 및 삽입 손실의 빠른 확인으로 사용할 수 있습니다. 워크시트는 단상 및 3상 AC 시스템에서 작동하며 두 가지 방법으로 CM 초크 매개변수를 쉽게 입력할 수 있습니다.
- CM 초크 행동 모델 사용
- 저항식 및 정전식 기생 – 페라이트 코어 초크에 적합
- 3개의 병렬 RL 회로로 구성된 래더 네트 - 나노크리스탈린 초크에 적합
- 측정된 임피던스 데이터(규모 및 위상) 사용
특징
- CM 초크 임피던스와 주파수 동작 검사
- 보상 및 댐핑 네트워크를 위한 부품 선택
- 수동 필터 구성 요소를 기반으로 안정성을 위해 루프 게인 최적화
- AEF를 활성화 및 비활성화하여 필터 감쇠 성능을 검사
다운로드
TPSF12CX-MATHCAD — TPSF12C1/-Q1 and TPSF12C3/-Q1 common-mode AEF Mathcad design file
지원되는 제품 및 하드웨어
제품
전원 공급 필터 IC
하드웨어 개발
평가 보드
TPSF12CX-MATHCAD — TPSF12C1/-Q1 and TPSF12C3/-Q1 common-mode AEF Mathcad design file
TPSF12C1/3 mathcad file
제품
전원 공급 필터 IC
하드웨어 개발
평가 보드
출시 정보
This Mathcad worksheet is offered to predict the stability of a voltage-sense, current-inject active EMI filter (AEF) circuit, in particular with respect to TI's TPSF12C1/3/-Q1 family of AEF ICs, and to assist with component selection. The model is inclusive of most parasitc effects and can be used as a quick check of the loop gain and insertion loss prior to simulation, bench measurement and fine tuning.
The worksheet functions for single- and 3-phase AC systems and facilitates two ways of entering the CM choke parameters:
1. Using an equivalent circuit model with (a) resistive and capacitive parasitics – suitable for ferrite-core chokes; (b) a ladder network of three parallel RL circuits -- suitable for nanocrystalline chokes
2. Using measured impedance data (magnitude and phase).
The worksheet is ideal for knowledge capture, unit-aware calculation reuse and for engineering collaboration amongst design, systems & application engineers.