DP83848SW-LINUX

適用於 DP83848 的 Linux 驅動程式

DP83848SW-LINUX

概覽

The Linux driver supports the DP83848 Ethernet physical layer (PHY) device. The Linux driver supports communication through MII/MDIO and registers with the PHY framework of the Linux kernel.

 

Linux mainline status

Available in Linux mainline: Yes
Available through git.ti.com: N/A

Supported Devices:

  • DP83848

 

Linux source files

The files associated with this device are:

  1. drivers/net/phy/dp83848.c

Source files

drivers/net/phy/dp83848.c

 

Enabling driver support

Configure kernel with "make menuconfig" (alternatively use "make xconfig" or"make nconfig")

Menuconfig location

Symbol: DP83848_PHY [=y]Type  : tristatePrompt: Driver for Texas Instruments DP83848 PHY  Location:    -> Device Drivers      -> Network device support (NETDEVICES [=y])        -> PHY Device support and infrastructure (PHYLIB [=y])  Defined at drivers/net/phy/Kconfig:144  Depends on: NETDEVICES [=y] && PHYLIB [=y]

Fixes & code enhancements

 

If there are fixes and or code enhancements that need to be added to thisdriver please either1. Send the patches to the relevant Linux Kernel community as listed in the maintainers file located: Hereor2.  Contact your TI representative.

 

 

下載 觀看有字幕稿的影片 影片

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援