LM3475EVAL

磁滯 PFET 降壓控制器

LM3475EVAL

立即訂購

概覽

The LM3475 evaluation board is provided as a tool for developing DC/DC converters based on the LM3475 IC. As shown in Figure 1, the evaluation board is configured to provide an output of 2.5V at up to 2A from an input up to 10V. The corresponding bill of material is given in Table 1. Typical efficiencies are shown in Figure 2 and Figure 3. Figure 4 and Figure 5 show the board layout.

特點
  • Easy to use control methodology
  • 0.8V to VIN adjustable output range
  • High Efficiency (90% typical)
  • 0.9% (1/5% over temp) feedback voltage
  • 100% duty cycle capable
  • Maximum operating frequency up to 2MHz
  • Internal Soft-Start
  • Enable pin
  • SOT23-5 package

Applications

  • TFT Monitor
  • Auto PC
  • Vehicle Security
  • Navigation Systems
  • Notebook Standy Supply
  • Battery Powered Portable Applications
  • Distributed Power Systems

 

AC/DC 和 DC/DC 控制器 (外部 FET)
LM3475 10-V 磁滯 PFET 降壓控制器
下載 觀看有字幕稿的影片 影片

訂購並開始開發

開發板

LM3475EVAL — Hysteretic PFET Buck Controller

支援產品和硬體
有庫存
限制:
TI.com 上缺貨
TI.com 無法提供

LM3475EVAL Hysteretic PFET Buck Controller

close
版本: null
發行日期:
適用 TI 的評估品項標準條款與條件。

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 下載最新的英文版本 日期
使用指南 LM3475 Buck Controller Evaluation Module User's Guide (Rev. B) PDF | HTML 2022/2/9
證書 LM3475EVAL EU Declaration of Conformity (DoC) 2019/1/2

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援