LM3489EVAL

具有啟用針腳的磁滯 PFET 降壓控制器

LM3489EVAL

立即訂購

概覽

The LM3489 is a high efficiency PFET switching regulator controller that can be used to quickly and easily develop a small, cost effective, switching buck regulator for a wide range of applications. The hysteretic control architecture provides for simple design without any control loop stability concerns using a wide variety of external components. The PFET architecture also allows for low component count as well as ultra-low dropout, and 100% duty cycle operation. Another benefit is high efficiency operation at light loads without an increase in output ripple. A dedicated Enable Pin (Enabled if left unconnected) provides a shutdown mode drawing only 7 µA.

特點
  • Wide 4.5V to 35V input range
  • 1.239V to VIN adjustable output range
  • High efficiency 93%
  • 1.3% ( 2% over temp) internal reference
  • 100% duty cycle operation
  • Maximum operation frequency > 1MHz
  • Current limit protection
  • Dedicated enable pin (on if unconnected)
  • Shutdown mode draws on 7uA supply current
  • MSOP-8

Applications

  • Set-top Box
  • DSL/Cable Modem
  • PC/IA
  • Auto PC
  • TFT Monitor
  • Battery Powered Portable Applications
  • Distributed Power Systems
  • Always On Power
  • High Power LED Driver

 

AC/DC 和 DC/DC 控制器 (外部 FET)
LM3489 具有啟用針腳的磁滯 PFET 降壓控制器 LM3489-Q1 具觸發針腳的汽車級別 4.5-35V、磁滯非同步 PFET 降壓控制器
下載 觀看有字幕稿的影片 影片

訂購並開始開發

開發板

LM3489EVAL/NOPB — Hysteretic PFET Buck Controller with Enable Pin

支援產品和硬體
有庫存
限制:
TI.com 上缺貨
TI.com 無法提供

LM3489EVAL/NOPB Hysteretic PFET Buck Controller with Enable Pin

close
版本: null
發行日期:
適用 TI 的評估品項標準條款與條件。

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 下載最新的英文版本 日期
證書 LM3489EVAL/NOPB EU Declaration of Conformity (DoC) 2019/1/2
使用指南 AN-1471 LM3489 Demonstration Board (Rev. A) 2013/4/25

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援