TIDM-CAPTIVATE-THERMOSTAT-UI is a low-power, capacitive touch based, thermostat user interface reference design. It features an on-board MSP430TM MCU CapTIvate™ technology which provides robust capacitive touch measurements with a low-power profile, low response time, and increased noise immunity. The design supports multiple modes of operation, including a battery powered mode and a line powered mode. The battery powered mode operates with an average current consumption of less than 50 µA, allowing for two years of battery life on typical AAA batteries. Line powered mode is optimized for noise immunity at the commercial product level. The design features eight buttons that support both momentary and maintained switch implementations. Each button is accompanied by an LED which can be used to indicate touch or switch state.
• MSP430 CapTIvate™ MCU for capacitive touch sensing
• CapTIvate™ Design Center support enabling real-time customization of response time, sensitivity, and other parameters from a host PC
• Multiple modes of operation, including a battery powered mode for increased battery life and a line powered mode for increased noise immunity
• Less than 50µA average current in battery powered mode, allowing for 2 years of battery life on typical AAA batteries
• Conducted noise immunity at the commercial product level (IEC 61000-4-6 Class A @ 3 Vrms) in line powered mode
• Mutual capacitance technology enables 8 buttons with only MCU 6 pins
• Maintained state and momentary capacitive switch implementations
• Ferroelectric random access memory (FRAM) enables button state and configuration retention through power loss
已開發完全組裝的電路板，僅供測試與性能驗證，且為非賣品。
下載立即可用的系統檔案以加速您的設計流程。
設計元件、參考指示項與製造商/零件編號的完整清單
IC 元件的 3D 模型或 2D 圖所使用的檔案
設計與潛在替代方案中包括 TI 產品。
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 設計指南 | Capacitive Touch Thermostat User Interface Design Guide | 2015/10/6 | |||
| 技術文章 | Trends in building automation: connected sensors for user comfort | PDF | HTML | 2016/9/2 |