TPS2590EVM
TPS2590 熱插拔控制器系統評估模組
TPS2590EVM
概覽
The EVM is a 3-V to 18-V module using the TPS2590/91 hot-swap controller with integrated MOSFET. At power on, the output is power limited to control inrush current and protect the MOSFET. On an over-current condition, the controller interrupts power to the load at high speed and signals load status. Operating current, fault current and fault timer settings are hardware programmable.
特點
- 3-V to 20-V Operation
- Controlled Inrush Current
- Fast Circuit Breaker Control
- Hardware Programmable
- LED Status Display
- A Slide Switch Controls the ENABLE Signal.
- Copper Pour with Vias to the Internal Ground takes Advantage of the Power Pad Package
- On-Board Transorb is for Over-Voltage Input Protection
- Common Diode at Output Prevents Negative Spike when Load is Removed While Powered On
- Monitor Circuit Operation Test Points
eFuse（整合式熱插拔）
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| 證書 | TPS2590EVM EU Declaration of Conformity (DoC) | 2019/1/2 | ||||
| 使用指南 | TPS2590 Hot Swap Controller Evaluation Module (Rev. A) | 2015/3/31 |