選取版本

選取版本

找不到結果。請清除您的搜尋條件,然後再試一次。

TPSF12CX-MATHCAD

TPSF12C1/-Q1 and TPSF12C3/-Q1 common-mode AEF Mathcad design file

選取版本
找不到結果。請清除您的搜尋條件,然後再試一次。
最新版本
版本: A1
發行日期: 2024/3/1

TPSF12C1/3 mathcad file

SHA-256 校驗和
產品
電源供應器濾波器 IC
TPSF12C1 適用於單相系統的共模主動 EMI 濾波器 (AEF) TPSF12C1-Q1 適用單相系統的車用共模主動 EMI 濾波器 (AEF) TPSF12C3 適用三相系統的共模主動 EMI 濾波器 (AEF) TPSF12C3-Q1 適用三相系統的車用共模主動 EMI 濾波器 (AEF)
硬體開發
開發板
TPSF12C1EVM-FILTER TPSF12C1 單相主動 EMI 濾波器評估模組 TPSF12C1QEVM TPSF12C1-Q1 單相主動 EMI 濾波器評估模組 TPSF12C3QEVM TPSF12C3-Q1 三相主動 EMI 濾波器評估板

版本資訊

This Mathcad worksheet is offered to predict the stability of a voltage-sense, current-inject active EMI filter (AEF) circuit, in particular with respect to TI's TPSF12C1/3/-Q1 family of AEF ICs, and to assist with component selection. The model is inclusive of most parasitc effects and can be used as a quick check of the loop gain and insertion loss prior to simulation, bench measurement and fine tuning.

 

The worksheet functions for single- and 3-phase AC systems and facilitates two ways of entering the CM choke parameters:

1. Using an equivalent circuit model with (a) resistive and capacitive parasitics –  suitable for ferrite-core chokes; (b) a ladder network of three parallel RL circuits -- suitable for nanocrystalline chokes

2. Using measured impedance data (magnitude and phase).

 

The worksheet is ideal for knowledge capture, unit-aware calculation reuse and for engineering collaboration amongst design, systems & application engineers.