SLUSBU9H March   2014  – June 2021 BQ2970 , BQ2971 , BQ2972 , BQ2973

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Device Comparison Table
  6. 6 Pin Configuration and Functions
    1. 6.1 Pin Descriptions
      1. 6.1.1 Supply Input: BAT
      2. 6.1.2 Cell Negative Connection: VSS
      3. 6.1.3 Voltage Sense Node: V–
      4. 6.1.4 Discharge FET Gate Drive Output: DOUT
      5. 6.1.5 Charge FET Gate Drive Output: COUT
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 DC Characteristics
    6. 7.6 Programmable Fault Detection Thresholds
    7. 7.7 Programmable Fault Detection Timer Ranges
    8. 7.8 Typical Characteristics
  8. 8 Parameter Measurement Information
    1. 8.1 Timing Charts
    2. 8.2 Test Circuits
    3. 8.3 Test Circuit Diagrams
  9. 9 Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
    4. 9.4 Device Functional Modes
      1. 9.4.1 Normal Operation
      2. 9.4.2 Overcharge Status
      3. 9.4.3 Over-Discharge Status
      4. 9.4.4 Discharge Overcurrent Status (Discharge Overcurrent, Load Short-Circuit)
      5. 9.4.5 Charge Overcurrent Status
      6. 9.4.6 0-V Charging Function Enabled
      7. 9.4.7 0-V Charging Inhibit Function
      8. 9.4.8 Delay Circuit
  10. 10Application and Implementation
    1. 10.1 Application Information
    2. 10.2 Typical Application
      1. 10.2.1 Design Requirements
      2. 10.2.2 Detailed Design Procedure
      3. 10.2.3 Application Performance Plots
  11. 11Power Supply Recommendations
  12. 12Layout
    1. 12.1 Layout Guidelines
    2. 12.2 Layout Example
  13. 13Device and Documentation Support
    1. 13.1 Related Documentation
    2. 13.2 Support Resources
    3. 13.3 Trademarks
    4. 13.4 Electrostatic Discharge Caution
    5. 13.5 Glossary
  14. 14Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

9.4.5 Charge Overcurrent Status

When a battery is in normal operation status and the voltage at V– pin is lower than the charge overcurrent detection due to high charge current for a time greater than charge overcurrent detection delay, the COUT pin is pulled low to turn OFF the charge FET and prevent further charging to continue. This is known as charge overcurrent status.

The device is restored to normal status from charge overcurrent status when the voltage at the V– pin returns to charge overcurrent detection voltage or higher by removing the charger from the system.

The charge overcurrent detection feature does not work in the over-discharge status.

The resistance RV–D between V– and BAT and the current sink IV–S is not connected in the charge overcurrent status.