SNVS037H September   1999  – March 2024 LM1084

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Ripple Rejection
      2. 6.3.2 Load Regulation
      3. 6.3.3 Overload Recovery
    4. 6.4 Device Functional Modes
      1. 6.4.1 Output Voltage
      2. 6.4.2 Stability Consideration
      3. 6.4.3 Protection Diodes
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Applications
      1. 7.2.1  1.2-V to 15-V Adjustable Regulator
        1. 7.2.1.1 Design Requirements
        2. 7.2.1.2 Detailed Design Procedure
        3. 7.2.1.3 Application Curve
      2. 7.2.2  Adjustable at 5 V
      3. 7.2.3  5-V Regulator With Shutdown
      4. 7.2.4  Battery Charger
      5. 7.2.5  Adjustable Fixed Regulator
      6. 7.2.6  Regulator with Reference
      7. 7.2.7  High Current Lamp Driver Protection
      8. 7.2.8  Battery Backup Regulated Supply
      9. 7.2.9  Ripple Rejection Enhancement
      10. 7.2.10 Automatic Light Control
      11. 7.2.11 Generating Negative Supply Voltage
      12. 7.2.12 Remote Sensing
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
        1. 7.4.1.1 Thermal Considerations
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Receiving Notification of Documentation Updates
    2. 8.2 Support Resources
    3. 8.3 Trademarks
    4. 8.4 Electrostatic Discharge Caution
    5. 8.5 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.4.1 Output Voltage

The LM1084 adjustable version develops a 1.25-V reference voltage, (VREF), between the output and the adjust pin. As shown in Figure 6-4, this voltage is applied across resistor R1 to generate a constant current I1. This constant current then flows through R2. The resulting voltage drop across R2 adds to the reference voltage to sets the desired output voltage.

The current IADJ from the adjustment terminal introduces an output error. But because it is small (120 uA max), it becomes negligible when R1 is in the 100 Ω range.

For fixed voltage devices, R1 and R2 are integrated inside the devices.

GUID-FB70EE23-8326-463A-B139-84E2D86F14BB-low.pngFigure 6-4 Basic Adjustable Regulator