SNVS037H September   1999  – March 2024 LM1084

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Ripple Rejection
      2. 6.3.2 Load Regulation
      3. 6.3.3 Overload Recovery
    4. 6.4 Device Functional Modes
      1. 6.4.1 Output Voltage
      2. 6.4.2 Stability Consideration
      3. 6.4.3 Protection Diodes
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Applications
      1. 7.2.1  1.2-V to 15-V Adjustable Regulator
        1. 7.2.1.1 Design Requirements
        2. 7.2.1.2 Detailed Design Procedure
        3. 7.2.1.3 Application Curve
      2. 7.2.2  Adjustable at 5 V
      3. 7.2.3  5-V Regulator With Shutdown
      4. 7.2.4  Battery Charger
      5. 7.2.5  Adjustable Fixed Regulator
      6. 7.2.6  Regulator with Reference
      7. 7.2.7  High Current Lamp Driver Protection
      8. 7.2.8  Battery Backup Regulated Supply
      9. 7.2.9  Ripple Rejection Enhancement
      10. 7.2.10 Automatic Light Control
      11. 7.2.11 Generating Negative Supply Voltage
      12. 7.2.12 Remote Sensing
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
        1. 7.4.1.1 Thermal Considerations
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Receiving Notification of Documentation Updates
    2. 8.2 Support Resources
    3. 8.3 Trademarks
    4. 8.4 Electrostatic Discharge Caution
    5. 8.5 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

7.2.3 5-V Regulator With Shutdown

A variation of the 5 V output regulator application with shutdown control is shown in Figure 7-3 based on the LM1084-ADJ. It uses a simple NPN transistor on the ADJ pin to block or sink the current on the ADJ pin. If the TTL logic is pulled high, the NPN transistor is activated and the part is disabled, outputting approximately 1.25 V. If the TTL logic is pulled low, the NPN transistor is unbiased and the regulator functions normally.

GUID-7EACAB46-0961-4D50-BFAE-4AABE9096FD3-low.pngFigure 7-3 5-V Regulator with Shutdown