SLUUC73A March   2020  – December 2023 BQ25616

 

  1.   1
  2.   BQ25616, BQ25616J BMS026 Evaluation Module
  3.   Trademarks
  4. 1Introduction
    1. 1.1 EVM Features
    2. 1.2 I/O Descriptions
  5. 2Test Summary
    1. 2.1 Equipment
    2. 2.2 Equipment Setup
    3. 2.3 Test Procedure
      1. 2.3.1 Initial Settings
      2. 2.3.2 Charge Mode Verification
      3. 2.3.3 Boost Mode Verification
      4. 2.3.4 Helpful Tips
  6. 3PCB Layout Guideline
  7. 4Board Layout
  8. 5Schematic
  9. 6Bill of Materials
  10. 7Revision History

1.1 EVM Features

For detailed features and operation, refer to Table 1-1 for a list of devices and their data sheets.

Table 1-1 Device Data Sheets
DeviceData SheetEVM LabelVariant
BQ25616SLUSDF7BQ25616EVM001
BQ25616JSLUSDF7BQ25616JEVM002

The BMS026 evaluation module (EVM) is a complete charger module for evaluating the standalone single-cell NVDC charger using any of the devices above.

This EVM features adjustable input current limit, charging current, and charging voltage. The EVM also has the abilty to test the D+/D- input source type detection, external input over-voltage protection, and simulate battery high and low temperature conditions.