SPRUJ73 December   2023

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
      1. 1.1.1 Read This First
        1. 1.1.1.1 Sitara MCU+ Academy
        2. 1.1.1.2 Important Usage Notes
    2. 1.2 Kit Contents
  6. 2Hardware Description
    1. 2.1 Component Identification
    2. 2.2 Power Requirements
      1. 2.2.1 Power Input Using USB Type-C Connector
      2. 2.2.2 Power Status LEDs
      3. 2.2.3 Power Tree
    3. 2.3 Functional Block Diagram
    4. 2.4 Header Information
    5. 2.5 Interfaces
      1. 2.5.1 ADC
      2. 2.5.2 LIN
      3. 2.5.3 MCAN
      4. 2.5.4 TRACE/GPMC Muxing Scheme
      5. 2.5.5 GPMC Memory Interface
        1. 2.5.5.1 PSRAM
        2. 2.5.5.2 GPMC Memory Footprint
        3. 2.5.5.3 NOR FLASH
      6. 2.5.6 TI 14-Pin Header
      7. 2.5.7 MIPI-60 Connector
    6. 2.6 HSEC Pinout
  7. 3Additional Information
    1. 3.1 If You Need Assistance
    2.     Trademarks
  8. 4References
    1. 4.1 Reference Documents
    2. 4.2 Other TI Components Used in This Design
  9. 5Revision History

Features

The AM263x controlCARD docking station has the following features:

  • PCB dimensions: 7.86 inch (199.61 mm) x 3.76 inch (95.62 mm)
  • Powered through 5V, 3A USB type-C input
  • LED indicators for:
    • Power status
  • 180-pin AM263x controlCARD compatible High Speed Edge Connector (HSEC)
  • CAN connectivity with on-board 2-channel CAN transceiver
  • LIN connectivity with on-board 2-channel LIN transceiver
  • Two variable resistors for ADC channel inputs with optional signal conditioning
  • 14-pin TI JTAG connector
  • MIPI-60 pin connector with JTAG and full TRACE support
  • On-Board Memory:
    • 64Mb PSRAM
    • 56-pin QFN-SMD pinout for AM263x SoC GPMC signals