TIDT192 October   2020

 

  1.   Description
  2. 1Test Prerequisites
    1. 1.1 Voltage and Current Requirements
    2. 1.2 Required Equipment
    3. 1.3 Considerations
    4. 1.4 Dimensions
  3. 2Testing and Results
    1. 2.1 Efficiency Graphs
    2. 2.2 Thermal Images
    3. 2.3 Frequency Response
  4. 3Waveforms
    1. 3.1 Start-up
    2. 3.2 Switching Waveforms

1.3 Considerations

When testing the board, apply < 2.5 V on current PWM port (CCset) and < 5 V on voltage PWM port (CVset) before apply AC and PSON high signal.