SBOK049 November   2023 OPA4H014-SEP

PRODUCTION DATA  

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Overview
  5. 2Test Procedures
  6. 3Facility
  7. 4Results
    1. 4.1 Input Bias Current Parametric Shift
    2. 4.2 Input Offset Voltage Parametric Shift
    3. 4.3 Other Parametric Shifts
  8. 5Summary of Results
  9.   A Test Results

1 Overview

The OPA4H014-SEP is a low-power JFET input operation amplifier (op amp) that features good drift and low input bias current. With an input range that includes V– and a rail-to-rail output, designers can take advantage of the low-noise characteristics of JFET amplifiers while interfacing to single-supply, precision analog-to-digital converters (ADCs) and digital-to-analog converters (DACs).

Table 1-1 lists general device information and NDD testing conditions.
Table 1-1 Overview Information
TI Part Number OPA4H014-SEP
VID Number V62/21607
Device Function Radiation Tolerant 11-MHz, Precision, Low-Noise, RRO, JFET Amp
Technology BICOM-3XHV
Device Package 14-pin TSSOP (PW)
Unbiased Quantity Tested 9
Exposure Facility VPT Rad, Chelmsford, MA
Neutron Fluence (1-MeV Equivalent) 1.0 × 1012, 5.0 × 1012, 1.0 × 1013 n/cm2
Irradiation Temperature 25°C
TI may provide technical, applications or design advice, quality characterization, and reliability data or service providing these items shall not expand or otherwise affect TI's warranties as set forth in the Texas Instruments Incorporated Standard Terms and Conditions of Sale for Semiconductor Products and no obligation or liability shall arise from Semiconductor Products and no obligation or liability shall arise from TI's provision of such items.