SLAU888 may   2023 AFE882H1

 

  1.   AFE882H1 Evaluation Module
  2.   Trademarks
  3. 1Overview
    1. 1.1 Kit Contents
    2. 1.2 Related Documentation From Texas Instruments
  4. 2System Setup
    1. 2.1 Software Setup
    2. 2.2 Hardware Setup
      1. 2.2.1 Electrostatic Discharge Caution
      2. 2.2.2 Power Configuration and Jumper Settings
      3. 2.2.3 Connecting the Hardware
        1. 2.2.3.1 Power Configuration
        2. 2.2.3.2 External SPI and UART Controllers
  5. 3Detailed Description
    1. 3.1 Hardware Description
      1. 3.1.1 Theory of Operation
      2. 3.1.2 Signal Definitions
      3. 3.1.3 XTR305 Configuration
    2. 3.2 Software Description
      1. 3.2.1 Starting the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 High Level Configuration Page
        2. 3.2.2.2 AFE882H1 Register Page
  6. 4Schematics, PCB Layout, and Bill of Materials
    1. 4.1 Board Schematic
    2. 4.2 PCB Components Layout
    3. 4.3 Bill of Materials

3.1.3 XTR305 Configuration

Following the output of the AFE882H1 output, the EVM board uses an XTR305 as an output for either voltage or current conversion. The XTR305 is set up to an output voltage of –11 V to +11 V or an output current of –25 mA to +25 mA. Figure 3-2 shows the XTR305 circuit on the AFE882H1EVM.

GUID-20221014-SS0I-CQLL-NRFV-Q0RJMZKJNBCF-low.svg Figure 3-2 XTR305 Circuit on the AFE882H1EVM