SLUUCX0 February   2024

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Recommended Power Requirements
    2. 2.2 I/O Description
    3. 2.3 Jumper Description
    4. 2.4 Setup for Different UCC57108 Variants
    5. 2.5 DESAT Setup
  7. 3Implementation Results
    1. 3.1 Out-The-Box Evaluation
    2. 3.2 Equipment Setup
      1. 3.2.1 Power Supply
      2. 3.2.2 Function Generator
      3. 3.2.3 Oscilloscope
      4. 3.2.4 Digital Multimeter (DMM)
    3. 3.3 Bench Setup
    4. 3.4 Procedure and Results
  8. 4Typical Performance Waveforms
    1. 4.1 DESAT Feature
    2. 4.2 Bipolar Feature of UCC57108B
  9. 5Hardware Design Files
    1. 5.1 Schematics
    2. 5.2 PCB Layouts
    3. 5.3 Bill of Materials
  10. 6Compliance Information
  11. 7Additional Information
    1. 7.1 Trademarks

2.3 Jumper Description

Table 2-3 UCC57108EVM Jumper Description
Jumper Name Description

J1

DESAT Jumper

Connects the DESAT pin to ground or FET drain

J2

Pin 7 Designator

Allows pin 7 compatibility with other UCC57108 variants

J3

Pin 8 Designator

 Allows pin 8 compatibility with other UCC57108 variants

J4

VREF Pullup

Pulls up fault signal to VREF

J5

VDD Pullup

Pulls up fault signal to VDD

J6

Input Jumper

Allows IN to be tied to VREF

J7

Enable Jumper

Allows EN to be tied to VREF