SLYU066 October   2023

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specifications
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 TMAG3001 EVM Components
    2. 2.2 SCB LEDs
  9. 3Software
    1. 3.1 Quick Start Setup
    2. 3.2 EVM Operation
      1. 3.2.1 Setup
        1. 3.2.1.1 Driver Installation
        2. 3.2.1.2 Firmware
          1. 3.2.1.2.1 Updating Firmware on SCB
        3. 3.2.1.3 GUI Setup and Usage
          1. 3.2.1.3.1 Initial Setup
          2. 3.2.1.3.2 GUI Operation
      2. 3.2.2 Rotate and Push Demo
      3. 3.2.3 CRC Calculator
      4. 3.2.4 Direct EVM Serial Communication
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1.     Trademarks
  12. 6Related Documentation

3.2 EVM Operation

Figure 4-2 and Figure 4-3 show how to connect the EVM to the included SCB.

GUID-20230928-SS0I-4WDQ-S7DT-0NHW5C1WVVND-low.png Figure 3-2 Sensor Control Board Connected to A1 Part of EVM
GUID-20230928-SS0I-8P9H-JB2P-NDN1WXSKJC6N-low.png Figure 3-3 Sensor Control Board Connected to A2 Part of EVM