Inicio Circuitos integrados de gestión de baterías Circuitos integrados para cargadores de baterías
Inicio
Circuitos integrados de gestión de baterías
Circuitos integrados para cargadores de baterías
NUEVO

BQ25756E

ACTIVO

Stand-alone or I²C-controlled bidirectional buck-boost charge controller for up to 7S batteries

Haga su pedido ahora
Hoja de datos

BQ25756E

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of series cells 1, 2, 3, 4, 5, 6, 7 Charge current (max) (A) 20 Vin (max) (V) 60 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiMH, SuperCap Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 36 Absolute max Vin (max) (V) 60 Control topology Switch-Mode Buck-boost Control interface I2C Features Adjustable switching frequency, BAT temp thermistor monitoring (JEITA profile), Bidirectional, IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, SYNC Pin, Solar input/MPPT, USB C/PD compatible, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 0 Rating Catalog Operating temperature range (°C) -40 to 125
Number of series cells 1, 2, 3, 4, 5, 6, 7 Charge current (max) (A) 20 Vin (max) (V) 60 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiMH, SuperCap Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 36 Absolute max Vin (max) (V) 60 Control topology Switch-Mode Buck-boost Control interface I2C Features Adjustable switching frequency, BAT temp thermistor monitoring (JEITA profile), Bidirectional, IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, SYNC Pin, Solar input/MPPT, USB C/PD compatible, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 0 Rating Catalog Operating temperature range (°C) -40 to 125
VQFN (RRV) 36 30 mm² 6 x 5
  • Wide input voltage operating range: 4.2 V to 36 V
  • Wide battery voltage operating range: up-to 36 V with multi-chemistry support:
    • 1- to 7-cell Li-ion charge profile
    • 1- to 9-cell LiFePO 4 charge profile
  • Synchronous buck-boost charge controller with NFET drivers
    • Adjustable switching frequency from 200 kHz to 600 kHz
    • Optional synchronization to external clock
    • Integrated loop compensation with soft start
    • Optional gate driver supply input for optimized efficiency
  • Automatic maximum power point tracking (MPPT) for solar charging
  • Bidirectional converter operation (Reverse Mode) supporting USB-PD Extended Power Range (EPR)
    • Adjustable input voltage (VAC) regulation from 3.3 V to 36 V with 20-mV/step
    • Adjustable input current regulation (R AC_SNS) from 400 mA to 20 A with 50-mA/step using 5-mΩ resistor
  • High accuracy
    • ±0.5% charge voltage regulation
    • ±3% charge current regulation
    • ±3% input current regulation
  • I 2C controlled for optimal system performance with resistor-programmable option
    • Hardware adjustable input and output current limits
  • Integrated 16-bit ADC for voltage, current, and temperature monitoring
  • High safety integration
    • Adjustable input overvoltage and undervoltage protection
    • Battery overvoltage and overcurrent protection
    • Charging safety timer
    • Battery short protection
    • Thermal shutdown
  • Status outputs
    • Adapter present status ( PG)
    • Charger operation status (STAT1, STAT2)
  • Package
    • 36-pin 5 mm × 6 mm QFN
  • Wide input voltage operating range: 4.2 V to 36 V
  • Wide battery voltage operating range: up-to 36 V with multi-chemistry support:
    • 1- to 7-cell Li-ion charge profile
    • 1- to 9-cell LiFePO 4 charge profile
  • Synchronous buck-boost charge controller with NFET drivers
    • Adjustable switching frequency from 200 kHz to 600 kHz
    • Optional synchronization to external clock
    • Integrated loop compensation with soft start
    • Optional gate driver supply input for optimized efficiency
  • Automatic maximum power point tracking (MPPT) for solar charging
  • Bidirectional converter operation (Reverse Mode) supporting USB-PD Extended Power Range (EPR)
    • Adjustable input voltage (VAC) regulation from 3.3 V to 36 V with 20-mV/step
    • Adjustable input current regulation (R AC_SNS) from 400 mA to 20 A with 50-mA/step using 5-mΩ resistor
  • High accuracy
    • ±0.5% charge voltage regulation
    • ±3% charge current regulation
    • ±3% input current regulation
  • I 2C controlled for optimal system performance with resistor-programmable option
    • Hardware adjustable input and output current limits
  • Integrated 16-bit ADC for voltage, current, and temperature monitoring
  • High safety integration
    • Adjustable input overvoltage and undervoltage protection
    • Battery overvoltage and overcurrent protection
    • Charging safety timer
    • Battery short protection
    • Thermal shutdown
  • Status outputs
    • Adapter present status ( PG)
    • Charger operation status (STAT1, STAT2)
  • Package
    • 36-pin 5 mm × 6 mm QFN

The BQ25756E is a wide input voltage, switched-mode buck-boost Li-Ion, Li-polymer, or LiFePO 4 battery charge controller with bidirectional power flow support. The device offers high-efficiency battery charging over a wide voltage range with accurate charge current and charge voltage regulation, in addition to automatic charge preconditioning, termination, and charge status indication. The device integrates all the loop compensation for the buck-boost converter, thereby providing a high density solution with ease of use. In reverse mode, the device draws power from the battery and regulates the input terminal voltage with an added constant current limit for protection, supporting USB-PD EPR power profile.

Besides the I 2C host-controlled charging mode, the device also supports standalone charging mode via resistor programmable limits. Input current, charge current and charge voltage regulation targets can be set via the ILIM_HIZ, ICHG and FB pins, respectively.

The BQ25756E is a wide input voltage, switched-mode buck-boost Li-Ion, Li-polymer, or LiFePO 4 battery charge controller with bidirectional power flow support. The device offers high-efficiency battery charging over a wide voltage range with accurate charge current and charge voltage regulation, in addition to automatic charge preconditioning, termination, and charge status indication. The device integrates all the loop compensation for the buck-boost converter, thereby providing a high density solution with ease of use. In reverse mode, the device draws power from the battery and regulates the input terminal voltage with an added constant current limit for protection, supporting USB-PD EPR power profile.

Besides the I 2C host-controlled charging mode, the device also supports standalone charging mode via resistor programmable limits. Input current, charge current and charge voltage regulation targets can be set via the ILIM_HIZ, ICHG and FB pins, respectively.
open-in-new Buscar otro/a Circuitos integrados para cargadores de baterías
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Tipo Título Fecha
* Data sheet BQ25756E: Standalone/I2C Controlled, 1- to 7-Cell Bidirectional Buck-Boost Battery Charge Controller datasheet PDF | HTML 28 nov 2023
EVM User's guide BQ25756E Evaluation Module User's Guide PDF | HTML 17 nov 2023
Certificate BQ25756EEVM EU Declaration of Conformity (DoC) 31 oct 2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BQ25756EEVM — Módulo de evaluación BQ25756E para controlador reductor-elevador bidireccional independiente o contr

El módulo de evaluación (EVM) BQ25756EEVM es un sistema de evaluación completo para el BQ25756E, un controlador de carga bidireccional con un amplio rango de tensión de entrada y salida de hasta 36 V. El dispositivo ofrece una carga de baterías de alta eficiencia en un amplio rango de tensión con (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Herramienta de cálculo

BQ25756-DESIGN-CALC — BQ25756 design calculator

BQ25756 design calculator is a calculation tool for BQ25756 which is a wide input voltage, switched mode buck-boost Li-Ion, Li-polymer, or LiFePO4 battery charge controller with bidirectional power flow support.
Productos y hardware compatibles

Productos y hardware compatibles

Productos
Circuitos integrados para cargadores de baterías
BQ25756 — Regulador de carga bidireccional reductor-elevador de 70 V independiente o controlado por I²C con BQ25758 — Controlador reductor-elevador bidireccional de 60 V controlado por I2C compatible con USB PD EPR y P BQ25756E — Stand-alone or I²C-controlled bidirectional buck-boost charge controller for up to 7S batteries
Desarrollo de hardware
Placa de evaluación
BQ25756EVM — Módulo de evaluación BQ25756 para controlador de carga de batería bidireccional reductor-elevador de
Descargar
Diseños de referencia

PMP41100 — Diseño de referencia de cargador solo de disipación USB Type-C® PD integrado de 27 W 

Este diseño de referencia de cargador compacto admite un cargador de baterías de 4 a 7 celdas y 900 mA apto para diversas aplicaciones, como herramientas eléctricas y aspiradoras con entrada de puerto USB Type-C. Cuenta con el controlador TPS25730D para una configuración de perfil de potencia sin (...)
Test report: PDF
Paquete Pasadores Descargar
VQFN (RRV) 36 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos