Inicio Controladores para motores Drivers para motores de CC sin escobillas (BLDC) Controladores BLDC de control integrado
Inicio
Controladores para motores
Drivers para motores de CC sin escobillas (BLDC)
Controladores BLDC de control integrado

DRV10987

ACTIVO

Controlador de motor BLDC trifásico, 12 V a 24 V nominal, pico de 3.5 A, control sinusoidal sin sens

Haga su pedido ahora
Hoja de datos

DRV10987

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Architecture Integrated FET Control topology Sensorless, Sinusoidal Control interface 1xPWM, Analog, Serial Vs (min) (V) 6.2 Vs ABS (max) (V) 45 Features Buck Step Down Converter, Initial Position Detect (IPD), Integrated FETs, Integrated Motor Control, Rotor Lock Protection, SPI/I2C, Tach/FG Feedback Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Integrated FET Control topology Sensorless, Sinusoidal Control interface 1xPWM, Analog, Serial Vs (min) (V) 6.2 Vs ABS (max) (V) 45 Features Buck Step Down Converter, Initial Position Detect (IPD), Integrated FETs, Integrated Motor Control, Rotor Lock Protection, SPI/I2C, Tach/FG Feedback Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 24 49.92 mm² 7.8 x 6.4
  • Operation Voltage Range:
    • Motor Operation, 6.2 V to 28 V
  • Total Driver H + L rDS(on)
    • 250 mΩ at TA = 25°C
  • Drive Current: 2-A Continuous Winding Current (3-A Peak)
  • Sensorless Sinusoidal 180° Commutation Scheme
  • Configurable Output PWM Slew Rate and Frequency for EMI Management
  • Initial Position-Detect Algorithm to Avoid Back-Spin During Start-Up
  • No External Sense Resistor Required
  • Flexible User Interface Options:
    • I2C Interface: Access Registers for Command and Feedback
    • Dedicated SPEED Pin: Accepts Either Analog or PWM Input
    • Dedicated FG Pin: Provides TACH Feedback
    • Spin-Up Profile Can Be Customized With EEPROM
    • Forward-Reverse Control With DIR Pin
  • Integrated Buck Converter, 5‑V, 100-mA
  • Integrated LDO, 3.3‑V, 20-mA
  • Standby Current, 8.5-mA
  • Supply Current of 8.5 mA With Standby Version (DRV10987S)
  • Supply Current of 48 µA With Sleep Version (DRV10987D)
  • Protection Features
    • Overcurrent Protection (Phase-to-Phase, Phase-to-GND and Phase-to-VCC Short Circuits)
    • Lock Detection to Detect Rotor Lock Condition
    • Anti-Voltage Surge (AVS) Protection
    • Undervoltae Lockout (UVLO)
    • Overvoltage Protection
    • Thermal Warning and Shutdown
  • Thermally Enhanced Package
  • Operation Voltage Range:
    • Motor Operation, 6.2 V to 28 V
  • Total Driver H + L rDS(on)
    • 250 mΩ at TA = 25°C
  • Drive Current: 2-A Continuous Winding Current (3-A Peak)
  • Sensorless Sinusoidal 180° Commutation Scheme
  • Configurable Output PWM Slew Rate and Frequency for EMI Management
  • Initial Position-Detect Algorithm to Avoid Back-Spin During Start-Up
  • No External Sense Resistor Required
  • Flexible User Interface Options:
    • I2C Interface: Access Registers for Command and Feedback
    • Dedicated SPEED Pin: Accepts Either Analog or PWM Input
    • Dedicated FG Pin: Provides TACH Feedback
    • Spin-Up Profile Can Be Customized With EEPROM
    • Forward-Reverse Control With DIR Pin
  • Integrated Buck Converter, 5‑V, 100-mA
  • Integrated LDO, 3.3‑V, 20-mA
  • Standby Current, 8.5-mA
  • Supply Current of 8.5 mA With Standby Version (DRV10987S)
  • Supply Current of 48 µA With Sleep Version (DRV10987D)
  • Protection Features
    • Overcurrent Protection (Phase-to-Phase, Phase-to-GND and Phase-to-VCC Short Circuits)
    • Lock Detection to Detect Rotor Lock Condition
    • Anti-Voltage Surge (AVS) Protection
    • Undervoltae Lockout (UVLO)
    • Overvoltage Protection
    • Thermal Warning and Shutdown
  • Thermally Enhanced Package

The DRV10987 device is a 3-phase sensorless 180° sinusodial motor driver with integrated power MOSFETs, which can provide continuous drive current up to 2 A. The device is specifically designed for cost-sensitive, low-noise, low-external-component-count fan and pump applications.

The DRV10987 device delivers current to the motor with supply voltage as low as 6.2 V. If the power supply voltage is higher than 28 V, the device stops driving the motor and protects the DRV10987 circuitry.

TI provides DRV10987 tuning Guide for quick setup and tuning of the device for optimal performance.

The DRV10987 device uses a proprietary sensorless control scheme to provide continuous sinusoidal drive, which significantly reduces the pure tone acoustics that typically occur as a result of commutation. The interface to the device is designed to be simple and flexible. The motor can be controlled directly through PWM, analog, or I2C inputs. Motor speed feedback is available through both the FG pin and the I2C interface simultaneously.

The DRV10987 device features an integrated buck regulator to step down the supply voltage efficiently to 5 V for powering both internal and external circuits. The 3.3-V LDO also may be used to provide power for external circuits. The standby-mode (8.5 mA) version (DRV10987S) leaves the regulator running, and the sleep-mode (48 µA) version (DRV10987D) shuts the regulator off. Throughout this data sheet, the DRV10987 part number is used for both devices, that is, DRV10987D (sleep version) and DRV10987S (standby version), except for specific discussions of sleep vs standby functionality.

An I2C interface allows the user to reprogram specific motor parameters in registers and to program the EEPROM to help optimize the performance for a given application. The DRV10987 device is available in a thermally-efficient HTSSOP, 24-pin package with an exposed thermal pad. The operating ambient temperature is specified from –40°C to 125°C.

The DRV10987 device is a 3-phase sensorless 180° sinusodial motor driver with integrated power MOSFETs, which can provide continuous drive current up to 2 A. The device is specifically designed for cost-sensitive, low-noise, low-external-component-count fan and pump applications.

The DRV10987 device delivers current to the motor with supply voltage as low as 6.2 V. If the power supply voltage is higher than 28 V, the device stops driving the motor and protects the DRV10987 circuitry.

TI provides DRV10987 tuning Guide for quick setup and tuning of the device for optimal performance.

The DRV10987 device uses a proprietary sensorless control scheme to provide continuous sinusoidal drive, which significantly reduces the pure tone acoustics that typically occur as a result of commutation. The interface to the device is designed to be simple and flexible. The motor can be controlled directly through PWM, analog, or I2C inputs. Motor speed feedback is available through both the FG pin and the I2C interface simultaneously.

The DRV10987 device features an integrated buck regulator to step down the supply voltage efficiently to 5 V for powering both internal and external circuits. The 3.3-V LDO also may be used to provide power for external circuits. The standby-mode (8.5 mA) version (DRV10987S) leaves the regulator running, and the sleep-mode (48 µA) version (DRV10987D) shuts the regulator off. Throughout this data sheet, the DRV10987 part number is used for both devices, that is, DRV10987D (sleep version) and DRV10987S (standby version), except for specific discussions of sleep vs standby functionality.

An I2C interface allows the user to reprogram specific motor parameters in registers and to program the EEPROM to help optimize the performance for a given application. The DRV10987 device is available in a thermally-efficient HTSSOP, 24-pin package with an exposed thermal pad. The operating ambient temperature is specified from –40°C to 125°C.
open-in-new Buscar otro/a Controladores BLDC de control integrado
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
MCF8316A ACTIVO Controlador de motor BLDC trifásico de 40 V máx., 8 A de pico, control FOC sin sensor New device integrates more advanced control algorithm features to easily tune the motor and achieve optimized performance.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 19
Tipo Título Fecha
* Data sheet DRV10987 12- to 24-V, Three-Phase, Sensorless BLDC Motor Driver datasheet (Rev. C) PDF | HTML 06 ago 2018
Application note MCT8316A - Design Challenges and Solution PDF | HTML 22 jun 2022
Application note MCF8316A - Design Challenges and Solutions PDF | HTML 29 nov 2021
Application note Best Practices for Board Layout of Motor Drivers (Rev. B) PDF | HTML 14 oct 2021
Application note Solving Sleep Mode Entry System Issues in the DRV10987D I2C Speed Command Mode PDF | HTML 20 ago 2021
Application note When to Use DRV10987 or DRV10983 19 oct 2018
Technical article Designing efficient, high-performing appliances with BLDC motors PDF | HTML 12 jul 2018
User guide DRV109xxEVM Quick Start Guide (Rev. C) 07 mar 2018
Technical article Cut the power and complexity of your appliance designs PDF | HTML 06 feb 2018
Technical article Integrated intelligence part 3: motor startup from standstill position PDF | HTML 11 dic 2017
Technical article Integrated intelligence part 2: motor startup open loop acceleration PDF | HTML 04 dic 2017
Technical article Brush up on the latest motor design considerations for appliances PDF | HTML 26 oct 2017
Design guide DRV10983, DRV10975, DRV10983-Q1, and DRV10987 Programming Tool Reference Design (Rev. A) 17 oct 2017
User guide User's Guide For The TIDA-01373 (Rev. A) 10 oct 2017
EVM User's guide DRV10987 Evaluation Module User's Guide 30 ago 2017
User guide DRV10987 Tuning Guide 30 ago 2017
User guide DRV10983x, DRV10975x, and DRV10987 IPD Tuning Guide (Rev. A) 30 may 2017
Application note How to Design a Thermally-Efficient Integrated BLDC Motor Drive PCB (Rev. A) 05 feb 2017
Application note Tuning Lead Angle in DRV10x Sensorless BLDC Drivers PDF | HTML 09 oct 2012

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DRV10987EVM — Módulo de evaluación DRV10987, trifásico de 12 V/24 V, sin sensor y sin escobillas; controlador de m

The DRV10987EVM evaluation module (EVM) serves as a user-friendly evaluation kit to demonstrate TI's fully integrated brushless motor driver, DRV10987. The EVM is a high-performance, power-efficient and cost-effective platform that speeds development for quicker time to market. The DRV10987EVM (...)
Guía del usuario: PDF
No disponible en TI.com
Ejemplo de código o demostración

TIDA-01373-SW — TIDA-01373 DRV10983_75 Example Code

lock = Requiere aprobación de exportación (1 minuto)
Productos y hardware compatibles

Productos y hardware compatibles

Productos
Controladores BLDC de control integrado
DRV10987 — Controlador de motor BLDC trifásico, 12 V a 24 V nominal, pico de 3.5 A, control sinusoidal sin sens
lock Descargar
Ejemplo de código o demostración

TIDA-01373-SW1 — TIDA-01373 DRV10983Q1 and DRV10987 Example Code

lock = Requiere aprobación de exportación (1 minuto)
Productos y hardware compatibles

Productos y hardware compatibles

Productos
Controladores BLDC de control integrado
DRV10987 — Controlador de motor BLDC trifásico, 12 V a 24 V nominal, pico de 3.5 A, control sinusoidal sin sens
lock Descargar
GUI para el módulo de evaluación (EVM)

SLOC345 — DRV109xx Software

lock = Requiere aprobación de exportación (1 minuto)
Productos y hardware compatibles

Productos y hardware compatibles

Productos
Controladores BLDC de control integrado
DRV10975 — Controlador de motor BLDC trifásico, 12 V nominal, pico de 2 A, control sinusoidal sin sensor DRV10983 — Controlador de motor BLDC trifásico, 24 V nominal, pico de 3 A, control sinusoidal sin sensor DRV10983-Q1 — Controlador de motor BLDC trifásico de control sinusoidal sin sensor, batería de 12 V, pico de 3.5 A DRV10987 — Controlador de motor BLDC trifásico, 12 V a 24 V nominal, pico de 3.5 A, control sinusoidal sin sens
Desarrollo de hardware
Placa de evaluación
DRV10975EVM — Módulo de evaluación DRV10975EVM de controlador de motor sin escobillas y trifásico DRV10983EVM — Módulo de evaluación de controlador de motor sin escobillas y trifásico DRV10983 DRV10983Q1EVM — Placa de evaluación DRV10983-Q1, 12 V, 24 V, motor CC para automoción trifásica, sin sensor, sin esc DRV10987EVM — Módulo de evaluación DRV10987, trifásico de 12 V/24 V, sin sensor y sin escobillas; controlador de m
lock Descargar
Archivo Gerber

DRV10987 Design File

SLOC347.ZIP (1030 KB)
Descargar
Archivo Gerber

DRV10987EVM Hardware Design Files

SLOC349.ZIP (4377 KB)
Descargar
Diseños de referencia

TIDA-01585 — Diseño de referencia de accionamiento del motor sinusoidal BLDC sin sensores de 24 V y 36 W, con con

This brushless DC (BLDC) motor drive reference design uses closed-loop control to achieve a very-high speed accuracy using only two chips. The first chip is a cost effective entry level MCU out of the popular ultra-low power MSP430 family. The other (DRV10987) is a three-phase, sensorless, (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-01493 — Diseño de referencia de accionamiento del motor BLDC de 2 capas y 60 W, sin sensores y con optimizac

This reference design is a sensorless brushless DC (BLDC) motor sinusoidal drive using the DRV10987 motor driver. The PCB is designed to lower the temperature of the DRV10987. The design targets cases that can over heat the DRV10987 or cases that need a low-case temperature due to material such as (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-01373 — Diseño de referencia de la herramienta de programación EEPROM

The TIDA-01373 is a reference hardware and software example of a scalable programming tool for the DRV10983, DRV10975, DRV10983-Q1, and DRV10987 integrated BLDC motor drivers. These devices feature configurable EEPROM registers that need to be set to motor-specific parameters. This reference (...)
Design guide: PDF
Esquema: PDF
Paquete Pasadores Descargar
HTSSOP (PWP) 24 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos