LM22672

ACTIVO

Regulador de tensión reductor de 1 A, 4.5 V a 42 V SIMPLE SWITCHER® con frecuencia ajustable

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat LM22672/-Q1 42-V, 1-A SIMPLE SWITCHER® Step-Down Voltage Regulator with Features datasheet (Rev. M) (Inglés) PDF | HTML

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

NUEVO LMR43610

ACTIVO

Regulador reductor síncrono de 3 V a 36 V, 1 A, baja EMI y baja IQ Ultra-small footprint, lower quiescent current, and dual random spread spectrum for lower EMI.

TLVM13620

ACTIVO

Módulo reductor de 3.6 V a 36 V de entrada, 1 V a 6 V de salida, 2 A, en encapsulado de 4 mm x 6 mm Save board space, simplify design and speed time to market with an integrated-inductor power module.

TPSM33615

ACTIVO

Módulo de alimentación reductor síncrono de 1.5 A, entrada de 3 V a 36 V, salida de 1 V a 15 V Smaller design with an integrated-inductor power module.

LM22672

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Iout (max) (A)

1

Vin (min) (V)

4.5

Vin (max) (V)

42

Topology

Buck

Type

Converter

Switching frequency (min) (kHz)

200

Switching frequency (max) (kHz)

1000

Features

Enable, Frequency synchronization, Over Current Protection

Control mode

Voltage mode

Vout (min) (V)

1.285

Vout (max) (V)

37

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.0034

Iout (max) (A)

1

Vin (min) (V)

4.5

Vin (max) (V)

42

Topology

Buck

Type

Converter

Switching frequency (min) (kHz)

200

Switching frequency (max) (kHz)

1000

Features

Enable, Frequency synchronization, Over Current Protection

Control mode

Voltage mode

Vout (min) (V)

1.285

Vout (max) (V)

37

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.0034

HSOIC (DDA)

8

29.4 mm² 4.9 x 6

Wide Input Voltage Range: 4.5 V to 42V
Internally Compensated Voltage Mode Control
Stable with Low ESR Ceramic Capacitors
200 mΩ N-Channel MOSFET
Output Voltage Options:
-ADJ (Outputs as Low as 1.285 V)
-5.0 (Output Fixed to 5 V)
±1.5% Feedback Reference Accuracy
500 kHz Default Switching Frequency
Adjustable Switching Frequency and Synchronization
–40°C to 125°C Junction Temperature Range
Precision Enable Input
Integrated Boot-Strap Diode
Adjustable Soft-Start
Fully WEBENCH^® Enabled
LM22672-Q1 is an Automotive Grade Product
that is AEC-Q100 Grade 1 Qualified (–40°C to +125°C
Junction Temperature)
SO PowerPAD (Exposed Pad)

Wide Input Voltage Range: 4.5 V to 42V
Internally Compensated Voltage Mode Control
Stable with Low ESR Ceramic Capacitors
200 mΩ N-Channel MOSFET
Output Voltage Options:
-ADJ (Outputs as Low as 1.285 V)
-5.0 (Output Fixed to 5 V)
±1.5% Feedback Reference Accuracy
500 kHz Default Switching Frequency
Adjustable Switching Frequency and Synchronization
–40°C to 125°C Junction Temperature Range
Precision Enable Input
Integrated Boot-Strap Diode
Adjustable Soft-Start
Fully WEBENCH^® Enabled
LM22672-Q1 is an Automotive Grade Product
that is AEC-Q100 Grade 1 Qualified (–40°C to +125°C
Junction Temperature)
SO PowerPAD (Exposed Pad)

The LM22672 switching regulator provides all of the functions necessary to implement an efficient high voltage step-down (buck) regulator using a minimum of external components. This easy to use regulator incorporates a 42 V N-channel MOSFET switch capable of providing up to 1 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5 V output and adjustable output voltage options are available.

The default switching frequency is set at 500 kHz allowing for small external components and good transient response. In addition, the frequency can be adjusted over a range of 200 kHz to 1 MHz with a single external resistor. The internal oscillator can be synchronized to a system clock or to the oscillator of another regulator. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typ). An adjustable soft-start feature is provided through the selection of a single external capacitor. The LM22672 also has built in thermal shutdown, and current limiting to protect against accidental overloads.

The LM22672 is a member of Texas Instruments’ SIMPLE SWITCHER^® family. The SIMPLE SWITCHER^® concept provides for an easy to use complete design using a minimum number of external components and the TI WEBENCH^® design tool. TI's WEBENCH^® tool includes features such as external component calculation, electrical simulation, thermal simulation, and Build-It boards for easy design-in.

The LM22672 switching regulator provides all of the functions necessary to implement an efficient high voltage step-down (buck) regulator using a minimum of external components. This easy to use regulator incorporates a 42 V N-channel MOSFET switch capable of providing up to 1 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5 V output and adjustable output voltage options are available.

The default switching frequency is set at 500 kHz allowing for small external components and good transient response. In addition, the frequency can be adjusted over a range of 200 kHz to 1 MHz with a single external resistor. The internal oscillator can be synchronized to a system clock or to the oscillator of another regulator. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typ). An adjustable soft-start feature is provided through the selection of a single external capacitor. The LM22672 also has built in thermal shutdown, and current limiting to protect against accidental overloads.

The LM22672 is a member of Texas Instruments’ SIMPLE SWITCHER^® family. The SIMPLE SWITCHER^® concept provides for an easy to use complete design using a minimum number of external components and the TI WEBENCH^® design tool. TI's WEBENCH^® tool includes features such as external component calculation, electrical simulation, thermal simulation, and Build-It boards for easy design-in.

open-in-new

Buscar otro/a AC/DC & DC/DC converters (integrated FET)

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 23

	Tipo	Título		Fecha
*	Data sheet	LM22672/-Q1 42-V, 1-A SIMPLE SWITCHER® Step-Down Voltage Regulator with Features datasheet (Rev. M)	PDF \| HTML	05 nov 2014
	Application note	Semiconductor and IC Package Thermal Metrics (Rev. D)	PDF \| HTML	25 mar 2024
	Selection guide	Power Management Guide 2018 (Rev. R)		25 jun 2018
	Technical article	How to control turn on/off thresholds in voltage regulators using a logic level UV	PDF \| HTML	23 jul 2015
	Application note	Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A)		12 sep 2014
	Application note	AN-1533 Overvoltage Protection Circuit for Automotive Load Dump (Rev. B)		06 may 2013
	Application note	AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A)		06 may 2013
	Application note	AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)		24 abr 2013
	Application note	AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)		23 abr 2013
	Application note	AN-1197 Selecting Inductors for Buck Converters (Rev. B)		23 abr 2013
	Application note	AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)		23 abr 2013
	Application note	AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C)		23 abr 2013
	Application note	AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)		23 abr 2013
	Application note	AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A)		23 abr 2013
	Application note	AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)		23 abr 2013
	EVM User's guide	AN-1896 LM22672 Evaluation Board (Rev. D)		23 abr 2013
	Application note	AN-2020 Thermal Design By Insight, Not Hindsight (Rev. C)		23 abr 2013
	Application note	AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)		23 abr 2013
	Application note	SIMPLE SWITCHER Regulators Take Over Automotive Applications (Rev. A)		23 abr 2013
	Design guide	SIMPLE SWITCHER® Design Guide		11 abr 2011
	Application note	Input and Output Capacitor Selection		19 sep 2005
	More literature	SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations		12 jul 2005
	Application note	AN-643 EMI/RFI Board Design (Rev. B)		03 may 2004

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM22672EVAL — Regulador SIMPLE SWITCHER de 1 A con EVM de ajuste de frecuencia o sincronización y habilitación de

The LM22672 evaluation board is designed to demonstrate the capabilities of the LM22672 switching regulator. The LM22672 evaluation board is configured to provide an output voltage of 3.3V up to 1A load current with an input voltage range of 4.5V to 42V. Due to the low RDS(ON) of the integrated (...)

Guía del usuario: PDF