The LM317HV-MIL is an adjustable 3-terminal positive voltage regulator capable of supplying 1.5 A or more currents over a 1.25-V to 57-V output voltage range. It requires only two external resistors to set the output voltage. The LM317HV-MIL is packaged in standard transistor packages that are easily mounted and handled.
The LM317HV-MIL offers overload protection like current limit, thermal overload protection and safe area protection, which make the device blowout proof. The overload protection circuitry remains fully functional even if the adjustment terminal is disconnected.
Typically, no capacitors are needed unless the device is situated more than 6 inches from the input filter capacitors, in which case an input bypass is needed. An optional output capacitor can be added to improve transient response. The adjustment terminal can be bypassed to achieve very high ripple rejection ratios which are difficult to achieve with standard 3-terminal regulators.
Since the regulator is floating and sees only the input-to-output differential voltage, supplies of several hundred volts can be regulated as long as the maximum input to output differential is not exceeded, or in other words, do not short the output to ground.
By connecting a fixed resistor between the adjustment and output, the LM317HV-MIL can also be used as a precision current regulator. Supplies with electronic shutdown can be achieved by clamping the adjustment terminal to ground, which programs the output to 1.25 V where most loads draw little current.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | LM317HV-MIL High Voltage Three-Terminal Adjustable Regulator With Overload Protection datasheet | PDF | HTML | 22 jun 2017 |
| Application note | A Topical Index of TI LDO Application Notes (Rev. F) | 27 jun 2019 | ||
| Application note | AN-1028 Maximum Power Enhancement Techniques for Power Packages (Rev. B) | 06 may 2013 | ||
| Application note | AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A) | 06 may 2013 | ||
| Application note | AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B) | 06 may 2013 | ||
| Application note | Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A) | 05 may 2013 | ||
| Application note | Packaging Limits Range of Linear Regulators | 08 may 2010 | ||
| Application note | Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A) | 04 jun 2008 | ||
| Application note | Adjustable 3-Terminal Regulator for Low-Cost Battery Charging Systems | 03 oct 2002 | ||
| Application note | Understanding the Terms and Definitions of LDO Voltage Regulators | 21 oct 1999 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
| Paquete | Pasadores | Descargar |
|---|---|---|
| TO-CAN (NDS) | 2 | Ver opciones |
| TO-CAN (NDT) | 3 | Ver opciones |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.