Inicio Gestión de la energía AC/DC & DC/DC converters (integrated FET)
Inicio
Gestión de la energía
AC/DC & DC/DC converters (integrated FET)

LMR34206-Q1

ACTIVO

Convertidor reductor síncrono ultrapequeño de 4,2 V a 42 V, 0,6 A

Haga su pedido ahora
Hoja de datos

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LMR36006-Q1 ACTIVO Convertidor reductor síncrono ultrapequeño de 4,2 V a 60 V, 0,6 A Pin-to-pin with LMR34206-Q1. High frequency and tight current limit to lower inductor size.

LMR34206-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Iout (max) (A) 0.6 Vin (min) (V) 3.6 Vin (max) (V) 42 Topology Buck Type Converter Switching frequency (min) (kHz) 400 Switching frequency (max) (kHz) 2100 Features Enable, Fixed Output, Light Load Efficiency, Power good, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, Wettable flanks package Control mode current mode Vout (min) (V) 3.3 Vout (max) (V) 40 Rating Automotive Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000025
Iout (max) (A) 0.6 Vin (min) (V) 3.6 Vin (max) (V) 42 Topology Buck Type Converter Switching frequency (min) (kHz) 400 Switching frequency (max) (kHz) 2100 Features Enable, Fixed Output, Light Load Efficiency, Power good, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, Wettable flanks package Control mode current mode Vout (min) (V) 3.3 Vout (max) (V) 40 Rating Automotive Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000025
VQFN-HR (RNX) 12 6 mm² 3 x 2
  • AEC-Q100-qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Designed for automotive applications
    • Junction temperature range –40°C to +150°C
    • Protection features: thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, hiccup short-circuit protection
    • 0.2-V dropout with 0.6-A load (typical)
    • ±1.5% reference voltage tolerance
    • 3.3-V, 5-V fixed-output voltage options
  • Suited for scalable power supplies
  • Integration reduces solution size and cost
    • Small, 2-mm × 3-mm VQFN package with wettable flanks
      • Few external components
    • Low power dissipation across load spectrum
      • Increased light load efficiency in PFM
      • Low operating quiescent current of 24 µA
    • Optimized for ultra low EMI requirements
      • Meets CISPR25 class 5 standard
      • Hotrod™ package minimizes switch node ringing
      • Parallel input path minimizes parasitic inductance
      • Spread spectrum reduces peak emissions
    • AEC-Q100-qualified for automotive applications:
      • Temperature grade 1: –40°C to +125°C, TA
    • Designed for automotive applications
      • Junction temperature range –40°C to +150°C
      • Protection features: thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, hiccup short-circuit protection
      • 0.2-V dropout with 0.6-A load (typical)
      • ±1.5% reference voltage tolerance
      • 3.3-V, 5-V fixed-output voltage options
    • Suited for scalable power supplies
    • Integration reduces solution size and cost
      • Small, 2-mm × 3-mm VQFN package with wettable flanks
        • Few external components
      • Low power dissipation across load spectrum
        • Increased light load efficiency in PFM
        • Low operating quiescent current of 24 µA
      • Optimized for ultra low EMI requirements
        • Meets CISPR25 class 5 standard
        • Hotrod™ package minimizes switch node ringing
        • Parallel input path minimizes parasitic inductance
        • Spread spectrum reduces peak emissions

      The LMR34206-Q1 regulator is an easy-to-use, synchronous, step-down DC/DC converter. With integrated high-side and low-side power MOSFETs, up to of output current is delivered over a wide input voltage range of 4.2 V to 42 V.

      The LMR34206-Q1 uses peak-current-mode control to provide optimal efficiency and output voltage accuracy. Precision enable gives flexibility by enabling a direct connection to the wide input voltage or precise control over device start-up and shutdown. The power-good flag, with built-in filtering and delay, offers a true indication of system status eliminating the requirement for an external supervisor.

      The LMR34206-Q1 is in a HotRod™ package which enables low EMI, higher efficiency, and the smallest package to die ratio. The device requires few external components and has a pinout designed for simple PCB layout. The small solution size and feature set of the LMR34206-Q1 are designed to simplify implementation for a wide range of end equipment.

      The LMR34206-Q1 regulator is an easy-to-use, synchronous, step-down DC/DC converter. With integrated high-side and low-side power MOSFETs, up to of output current is delivered over a wide input voltage range of 4.2 V to 42 V.

      The LMR34206-Q1 uses peak-current-mode control to provide optimal efficiency and output voltage accuracy. Precision enable gives flexibility by enabling a direct connection to the wide input voltage or precise control over device start-up and shutdown. The power-good flag, with built-in filtering and delay, offers a true indication of system status eliminating the requirement for an external supervisor.

      The LMR34206-Q1 is in a HotRod™ package which enables low EMI, higher efficiency, and the smallest package to die ratio. The device requires few external components and has a pinout designed for simple PCB layout. The small solution size and feature set of the LMR34206-Q1 are designed to simplify implementation for a wide range of end equipment.
      open-in-new Buscar otro/a AC/DC & DC/DC converters (integrated FET)
      Descargar Ver vídeo con transcripción Video

      Documentación técnica

      star =Principal documentación para este producto seleccionada por TI
      No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
      Ver todo 6
      Tipo Título Fecha
      * Data sheet LMR34206-Q1 4.2-V to 42-V, 0.6-A Ultra-Small Synchronous Step-Down Converter datasheet (Rev. A) PDF | HTML 03 oct 2019
      Selection guide Buck Converter Quick Reference Guide (Rev. B) 08 abr 2021
      Technical article Powering levels of autonomy: a quick guide to DC/DC solutions for SAE autonomy lev 18 nov 2020
      Technical article Optimizing flip-chip IC thermal performance in automotive designs PDF | HTML 11 dic 2019
      EVM User's guide LMR34206 and LMR34215 EVM User's Guide 26 sep 2019
      Design guide Automotive ADAS camera power supply reference design (Rev. A) 22 ago 2019

      Diseño y desarrollo

      Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

      Placa de evaluación

      LMR34215FSC5EVM — Módulo de evaluación del convertidor reductor síncrono de 42 V y 1,5 A

      The LMR34215FSC5EVM evaluation module (EVM) helps designers evaluate the operation and performance of the LMR34215-Q1 wide-input buck regulator. The LMR34215-Q1 is an easy-to-use synchronous step-down DC/DC converter capable of driving up to 1.5 A of load current from an input voltage of up to 42 (...)
      Guía del usuario: PDF
      No disponible en TI.com
      Modelo de simulación

      LMR34206FSC5-Q1 Unencrypted PSPICE TRANSIENT MODEL

      SNVMBT4.ZIP (162 KB) - PSpice Model
      Descargar
      Modelo de simulación

      LMR34206SC5-Q1 Unencrypted PSPICE TRANSIENT MODEL

      SNVMBT8.ZIP (186 KB) - PSpice Model
      Descargar
      Diseños de referencia

      PMP31273 — Diseño de referencia de convertidor reductor dual automotriz para MCU C2000™ con supervisor y vigila

      Este diseño de referencia es una fuente de alimentación flexible y compacta que proporciona rieles de salida de 5 V y 3.3 V para alimentar el MCU C2000™. El diseño incluye dos dispositivos convertidores de bajada síncronos ultra pequeños LMR34206-Q1 y un supervisor de tensión de precisión (...)
      Test report: PDF
      Paquete Pasadores Descargar
      VQFN-HR (RNX) 12 Ver opciones
      Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

      Pedidos y calidad

      Información incluida:
      • RoHS
      • REACH
      • Marcado del dispositivo
      • Acabado de plomo/material de la bola
      • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
      • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
      • Contenido del material
      • Resumen de calificaciones
      • Monitoreo continuo de confiabilidad
      Información incluida:
      • Lugar de fabricación
      • Lugar de ensamblaje

      Soporte y capacitación

      Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

      Ver todos los temas del foro en inglés

      El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

      Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

      Videos