PCM4220

ACTIVO

ADC de audio estéreo con SNR de 123 dB con salida PCM

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat High-Performance, 2-Ch, 24-Bit, 216kHz Sampling Multi-Bit Delta-Sigma ADC datasheet (Rev. C) (Inglés)

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

NUEVO TAA5242

PRESENTACIÓN PRELIMINAR

ADC de audio estéreo de alto rendimiento y baja potencia con un rango dinámico de 118 dB Similar performance, lower power, smaller 4x4mm QFN package

PCM4220

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of ADC channels

2

Analog inputs

2

Digital audio interface

I2S, L, TDM

Control interface

H/W

Sampling rate (max) (kHz)

216

ADC SNR (typ) (dB)

123

Rating

Catalog

Analog outputs

0

Operating temperature range (°C)

-40 to 85

Number of ADC channels

2

Analog inputs

2

Digital audio interface

I2S, L, TDM

Control interface

H/W

Sampling rate (max) (kHz)

216

ADC SNR (typ) (dB)

123

Rating

Catalog

Analog outputs

0

Operating temperature range (°C)

-40 to 85

TQFP (PFB)

48

81 mm² 9 x 9

Supports Linear PCM Output Data
- Output Sampling Rates from 8kHz to 216kHz
Differential Voltage Inputs
On-Chip Voltage Reference Improves Power-Supply Noise Rejection
Dynamic Performance (24-bit word length)
- Dynamic Range (–60dB input, A-weighted): 123dB typical
- Dynamic Range (–60dB input, 20kHz bandwidth): 121dB typical
- Total Harmonic Distortion + Noise
  (–1dB input, 20kHz bandwidth):
  –108dB typical
- Channel Separation: 135dB
Low Power Dissipation:
- 305mW typical for 48kHz sampling rate
- 330mW typical for 96kHz sampling rate
- 340mW typical for 192kHz sampling rate
Linear Phase Digital Decimation Filtering
- Select from Classic or Low Group Delay Filter Responses
- Low Passband Ripple
  Classic: ±0.00015dB
  Low Group Delay: ±0.001dB

blank

Digital High-Pass Filtering Removes DC Offset
- Left and Right Channel Filters May Be Disabled Independently
Audio Serial Port Interface
- Master or Slave Mode Operation
- Supports Left-Justified, I²S, and TDM Data Formats
Output Word Length Reduction
Overflow Indicators for the Left and Right Channels
Analog Power Supply: +4.0V nominal
Digital Power Supply: +3.3V nominal
Power-Down Mode: 4mW typical
Package: TQFP-48, RoHS compliant
APPLICATIONS
- Digital Audio Recorders and Mixing Desks
- Digital Live Sound Consoles
- Digital Audio Effects Processors
- Surround Sound Encoders
- Broadcast Studio Equipment
- Data Acquisition and
  Measurement Systems
- Audio Test Systems
- Sonar

All trademarks are the property of their respective owners.

Supports Linear PCM Output Data
- Output Sampling Rates from 8kHz to 216kHz
Differential Voltage Inputs
On-Chip Voltage Reference Improves Power-Supply Noise Rejection
Dynamic Performance (24-bit word length)
- Dynamic Range (–60dB input, A-weighted): 123dB typical
- Dynamic Range (–60dB input, 20kHz bandwidth): 121dB typical
- Total Harmonic Distortion + Noise
  (–1dB input, 20kHz bandwidth):
  –108dB typical
- Channel Separation: 135dB
Low Power Dissipation:
- 305mW typical for 48kHz sampling rate
- 330mW typical for 96kHz sampling rate
- 340mW typical for 192kHz sampling rate
Linear Phase Digital Decimation Filtering
- Select from Classic or Low Group Delay Filter Responses
- Low Passband Ripple
  Classic: ±0.00015dB
  Low Group Delay: ±0.001dB

blank

Digital High-Pass Filtering Removes DC Offset
- Left and Right Channel Filters May Be Disabled Independently
Audio Serial Port Interface
- Master or Slave Mode Operation
- Supports Left-Justified, I²S, and TDM Data Formats
Output Word Length Reduction
Overflow Indicators for the Left and Right Channels
Analog Power Supply: +4.0V nominal
Digital Power Supply: +3.3V nominal
Power-Down Mode: 4mW typical
Package: TQFP-48, RoHS compliant
APPLICATIONS
- Digital Audio Recorders and Mixing Desks
- Digital Live Sound Consoles
- Digital Audio Effects Processors
- Surround Sound Encoders
- Broadcast Studio Equipment
- Data Acquisition and
  Measurement Systems
- Audio Test Systems
- Sonar

All trademarks are the property of their respective owners.

The PCM4220 is a high-performance, two-channel analog-to-digital (A/D) converter designed for use in professional audio applications. Offering outstanding dynamic performance, the PCM4220 provides 24-bit linear PCM output data, with support for output word length reduction to 20-, 18-, or 16-bits. The PCM4220 includes three sampling modes, supporting output sampling rates from 8kHz to 216kHz. The PCM4220 is ideal for a variety of digital audio recording and processing applications.

A linear phase digital decimation filtering engine supports Classic and Low Group Delay filter responses, allowing optimization for either studio or live sound applications. In addition, digital high-pass filtering is provided for DC offset removal. The The PCM4220 is configured using dedicated control pins for selection of sampling modes, audio data formats and word length, decimation filter response, high-pass filter disable, and reset/power-down functions.

While providing uncompromising performance, the PCM4220 addresses power concerns with just over 300mW typical total power dissipation, making the device suitable for multi-channel audio systems. The PCM4220 is typically powered from a +4.0V analog supply and a +3.3V digital supply. The digital I/O is logic-level compatible with common digital signal processors, digital interface transmitters, and programmable logic devices. The PCM4220 is available in a TQFP-48 package, which is RoHS-compliant.

The PCM4220 is a high-performance, two-channel analog-to-digital (A/D) converter designed for use in professional audio applications. Offering outstanding dynamic performance, the PCM4220 provides 24-bit linear PCM output data, with support for output word length reduction to 20-, 18-, or 16-bits. The PCM4220 includes three sampling modes, supporting output sampling rates from 8kHz to 216kHz. The PCM4220 is ideal for a variety of digital audio recording and processing applications.

A linear phase digital decimation filtering engine supports Classic and Low Group Delay filter responses, allowing optimization for either studio or live sound applications. In addition, digital high-pass filtering is provided for DC offset removal. The The PCM4220 is configured using dedicated control pins for selection of sampling modes, audio data formats and word length, decimation filter response, high-pass filter disable, and reset/power-down functions.

While providing uncompromising performance, the PCM4220 addresses power concerns with just over 300mW typical total power dissipation, making the device suitable for multi-channel audio systems. The PCM4220 is typically powered from a +4.0V analog supply and a +3.3V digital supply. The digital I/O is logic-level compatible with common digital signal processors, digital interface transmitters, and programmable logic devices. The PCM4220 is available in a TQFP-48 package, which is RoHS-compliant.

open-in-new

Buscar otro/a ADC de audio

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Funcionalidad similar a la del dispositivo comparado

PCM4202

ACTIVO

ADC de audio estéreo con SNR de 118 dB Much lower power consumption, 118dB SNR

PCM4204

ACTIVO

ADC de audio de 4 canales con SNR de 118 dB 4 channels, 118dB SNR

PCM4222

ACTIVO

ADC de audio estéreo con SNR de 124 dB con salidas PCM/DSD y modulador Higher SNR, supports DSD, 6-bit modulator data output

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 1

	Tipo	Título		Fecha
*	Data sheet	High-Performance, 2-Ch, 24-Bit, 216kHz Sampling Multi-Bit Delta-Sigma ADC datasheet (Rev. C)		07 ago 2009

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

Solicitar

Paquete	Pasadores	Descargar
TQFP (PFB)	48	Ver opciones

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

PCM4220

ADC de audio estéreo con SNR de 123 dB con salida PCM

Se encuentra disponible una versión más nueva de este producto

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

PCM4220

Detalles del producto

Productos similares que pueden interesarle

Funcionalidad similar a la del dispositivo comparado

Documentación técnica

Diseño y desarrollo

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos