The ’ACT533 devices are octal transparent D-type latches with 3-state outputs. When the latch-enable (LE) input is high, the Q\ outputs follow the complements of the data (D) inputs. When LE is taken low, the Q\ outputs are latched at the inverted levels set up at the D inputs.
A buffered output-enable (OE)\ input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components.
(OE)\ does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, (OE)\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | SN54ACT533, SN74ACT533 datasheet (Rev. C) | 08 oct 2002 | |
| Application note | Power-Up Behavior of Clocked Devices (Rev. B) | PDF | HTML | 15 dic 2022 | |
| Application note | Implications of Slow or Floating CMOS Inputs (Rev. E) | 26 jul 2021 | ||
| Selection guide | Logic Guide (Rev. AB) | 12 jun 2017 | ||
| Application note | Understanding and Interpreting Standard-Logic Data Sheets (Rev. C) | 02 dic 2015 | ||
| User guide | LOGIC Pocket Data Book (Rev. B) | 16 ene 2007 | ||
| Application note | Semiconductor Packing Material Electrostatic Discharge (ESD) Protection | 08 jul 2004 | ||
| Application note | Selecting the Right Level Translation Solution (Rev. A) | 22 jun 2004 | ||
| Application note | TI IBIS File Creation, Validation, and Distribution Processes | 29 ago 2002 | ||
| Application note | CMOS Power Consumption and CPD Calculation (Rev. B) | 01 jun 1997 | ||
| Application note | Designing With Logic (Rev. C) | 01 jun 1997 | ||
| Application note | Using High Speed CMOS and Advanced CMOS in Systems With Multiple Vcc | 01 abr 1996 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
El módulo de evaluación 14-24-LOGIC-EVM (EVM) está diseñado para admitir cualquier dispositivo lógico que esté en un encapsulado D, DW, DB, NS, PW, DYY o DGV de 14 a 24 pines.
| Paquete | Pasadores | Descargar |
|---|---|---|
| PDIP (N) | 20 | Ver opciones |
| SOIC (DW) | 20 | Ver opciones |
| TSSOP (PW) | 20 | Ver opciones |
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.