Inicio Amplificadores Amplificadores operacionales (op amps) Amplificadores operacionales de alta velocidad (GBW ≥ 50 MHz)
Inicio
Amplificadores
Amplificadores operacionales (op amps)
Amplificadores operacionales de alta velocidad (GBW ≥ 50 MHz)

THS3201-EP

NO RECOMENDADO PARA NUEVOS DISEÑOS

Amplificador de retroalimentación de corriente de baja distorsión de 1.8 GHz de producto mejorado

Haga su pedido ahora
Hoja de datos
THS3201-EP no se recomienda para nuevos diseños
Aunque esta producto sigue en producción para dar soporte a diseños anteriores, no lo recomendamos para nuevos diseños. Considere una de estas alternativas:
open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
LMH6628QML ACTIVO Amplificador operacional doble de banda ancha y bajo ruido con retroalimentación de tensión Dual channel, extended temperature range (-55°C) and wide bandwidth (300MHz)

THS3201-EP

NO RECOMENDADO PARA NUEVOS DISEÑOS
Hoja de datos Haga su pedido ahora

Detalles del producto

Architecture Current FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6.6 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 15 GBW (typ) (MHz) 1800 BW at Acl (MHz) 1800 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 6700 Vn at flatband (typ) (nV√Hz) 1.65 Vn at 1 kHz (typ) (nV√Hz) 1.65 Iq per channel (typ) (mA) 14 Vos (offset voltage at 25°C) (max) (mV) 4 Rail-to-rail No Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 CMRR (typ) (dB) 71 Input bias current (max) (pA) 35000000 Offset drift (typ) (µV/°C) 10 Iout (typ) (mA) 115 2nd harmonic (dBc) 69 3rd harmonic (dBc) 75 Frequency of harmonic distortion measurement (MHz) 10
Architecture Current FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6.6 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 15 GBW (typ) (MHz) 1800 BW at Acl (MHz) 1800 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 6700 Vn at flatband (typ) (nV√Hz) 1.65 Vn at 1 kHz (typ) (nV√Hz) 1.65 Iq per channel (typ) (mA) 14 Vos (offset voltage at 25°C) (max) (mV) 4 Rail-to-rail No Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 CMRR (typ) (dB) 71 Input bias current (max) (pA) 35000000 Offset drift (typ) (µV/°C) 10 Iout (typ) (mA) 115 2nd harmonic (dBc) 69 3rd harmonic (dBc) 75 Frequency of harmonic distortion measurement (MHz) 10
HVSSOP (DGN) 8 14.7 mm² 3 x 4.9
  • Unity Gain Bandwidth: 1.8 GHz
  • High Slew Rate: 6700 V/µs (G = 2 V/V, RL = 100 , 5-V Step)
  • IMD3: &150;78 dBc at 20 MHz: (G = 10 V/V, RL = 100 , 2-VPP Envelope)
  • Noise Figure: 11 dB (G = 10 V/V, RG = 28 , RF = 255 )
  • Input Referred Noise (f > 10 MHz)
    • Voltage Noise: 1.65 nV/Hz
    • Noninverting Current Noise: 13.4 pA/Hz
    • Inverting Current Noise: 20 pA/Hz
  • Output Drive: 100 mA
  • Power-Supply Voltage Range: ±3.3 V to ±7.5 V
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–5°C/125°C) Temperature Range(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability
  • APPLICATIONS
    • High-Resolution, High-Sampling-Rate Analog-to-Digital Converter Drivers
    • High-Resolution, High-Sampling-Rate Digital-to-Analog Converter Output Buffers
    • Test and Measurement
    • ATE

Additional temperature ranges are available - contact factory
PowerPAD is a trademark of Texas Instruments.
  • Unity Gain Bandwidth: 1.8 GHz
  • High Slew Rate: 6700 V/µs (G = 2 V/V, RL = 100 , 5-V Step)
  • IMD3: &150;78 dBc at 20 MHz: (G = 10 V/V, RL = 100 , 2-VPP Envelope)
  • Noise Figure: 11 dB (G = 10 V/V, RG = 28 , RF = 255 )
  • Input Referred Noise (f > 10 MHz)
    • Voltage Noise: 1.65 nV/Hz
    • Noninverting Current Noise: 13.4 pA/Hz
    • Inverting Current Noise: 20 pA/Hz
  • Output Drive: 100 mA
  • Power-Supply Voltage Range: ±3.3 V to ±7.5 V
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–5°C/125°C) Temperature Range(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability
  • APPLICATIONS
    • High-Resolution, High-Sampling-Rate Analog-to-Digital Converter Drivers
    • High-Resolution, High-Sampling-Rate Digital-to-Analog Converter Output Buffers
    • Test and Measurement
    • ATE

Additional temperature ranges are available - contact factory
PowerPAD is a trademark of Texas Instruments.

The THS3201 is a wide-band, high-speed current-feedback amplifier, designed to operate over a wide supply range of ±3.3 V to ±7.5 V for today’s high-performance applications.

The wide supply range, combined with low distortion and high slew rate, makes the THS3201 ideally suited for arbitrary waveform driver applications. The distortion performance also enables driving high-resolution and high-sampling rate ADCs.

High-voltage operation capabilties make the THS3201 especially suitable for many test, measurement, and ATE applications where lower-voltage devices do not offer enough voltage swing capabilty. Output rise and fall times are nearly independent of step size (to first-order appoximation), making the THS3201 ideal for buffering small to large step pulses with excellent linearity in high dynamic systems.

The THS3201 is offered in 8-pin SOIC and 8-pin MSOP with PowerPADTM packages.

The THS3201 is a wide-band, high-speed current-feedback amplifier, designed to operate over a wide supply range of ±3.3 V to ±7.5 V for today’s high-performance applications.

The wide supply range, combined with low distortion and high slew rate, makes the THS3201 ideally suited for arbitrary waveform driver applications. The distortion performance also enables driving high-resolution and high-sampling rate ADCs.

High-voltage operation capabilties make the THS3201 especially suitable for many test, measurement, and ATE applications where lower-voltage devices do not offer enough voltage swing capabilty. Output rise and fall times are nearly independent of step size (to first-order appoximation), making the THS3201 ideal for buffering small to large step pulses with excellent linearity in high dynamic systems.

The THS3201 is offered in 8-pin SOIC and 8-pin MSOP with PowerPADTM packages.
open-in-new Buscar otro/a Amplificadores operacionales de alta velocidad (GBW ≥ 50 MHz)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet 1.8-GHz Low Distortion Current Feedback Amplifier datasheet (Rev. B) 08 ene 2009
* VID THS3201-EP VID V6205609 21 jun 2016
* Radiation & reliability report THS3201MDGNREP Reliability Report 05 oct 2011
Application note Noise Analysis for High Speed Op Amps (Rev. A) 17 ene 2005

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de cálculo

ANALOG-ENGINEER-CALC — Calculadora para ingenieros analógicos

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
Ver opciones
Herramienta de cálculo

VOLT-DIVIDER-CALC — Voltage divider calculation tool

<
Diseñar ahora
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
Ver opciones
Paquete Pasadores Descargar
HVSSOP (DGN) 8 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos