Inicio Gestión de la energía AC/DC & DC/DC controllers (external FET)

TPS5130-Q1

ACTIVO

Controlador reductor automotriz síncrono triple de 4.5 V a 28 V con controlador LDO

Detalles del producto

Vin (min) (V) 4.5 Vin (max) (V) 28 Iout (max) (A) 15 Operating temperature range (°C) -40 to 125 Control mode Voltage mode Rating Automotive Vout (min) (V) 0.9 Vout (max) (V) 8.5 Iq (typ) (A) 0.002 Duty cycle (max) (%) 82 Number of phases 1
Vin (min) (V) 4.5 Vin (max) (V) 28 Iout (max) (A) 15 Operating temperature range (°C) -40 to 125 Control mode Voltage mode Rating Automotive Vout (min) (V) 0.9 Vout (max) (V) 8.5 Iq (typ) (A) 0.002 Duty cycle (max) (%) 82 Number of phases 1
LQFP (PT) 48 81 mm² 9 x 9
  • Qualified for Automotive Applications
  • Three Independent Step-Down DC/DC Controllers
    and One LDO Controller
  • Input Voltage Range
    • Switcher: 4.5 V to 28 V
    • LDO: 1.1 V to 3.6 V
  • Output Voltage Range
    • Switcher: 0.9 V to 8.5 V
    • LDO: 0.9 V to 2.5 V
  • Synchronous for High Efficiency
  • Precision Vref (±1.5%)
  • PWM Mode Control : 500-kHz Operation (Max)
  • Auto PWM/SKIP Mode Available
  • High-Speed Error Amplifier
  • Overcurrent Protection With Temperature Compensation
    Circuit for Each Channel
  • Overvoltage and Undervoltage Protection
  • Programmable Short-Circuit Protection
  • Power Good Output (PGOUT) With Programmable
    Delay Time
  • 5-V and 3.3-V Linear Regulators
  • APPLICATIONS
    • Notebook PCs, PDAs
    • Consumer Game Systems
    • DSP Applications
  • Qualified for Automotive Applications
  • Three Independent Step-Down DC/DC Controllers
    and One LDO Controller
  • Input Voltage Range
    • Switcher: 4.5 V to 28 V
    • LDO: 1.1 V to 3.6 V
  • Output Voltage Range
    • Switcher: 0.9 V to 8.5 V
    • LDO: 0.9 V to 2.5 V
  • Synchronous for High Efficiency
  • Precision Vref (±1.5%)
  • PWM Mode Control : 500-kHz Operation (Max)
  • Auto PWM/SKIP Mode Available
  • High-Speed Error Amplifier
  • Overcurrent Protection With Temperature Compensation
    Circuit for Each Channel
  • Overvoltage and Undervoltage Protection
  • Programmable Short-Circuit Protection
  • Power Good Output (PGOUT) With Programmable
    Delay Time
  • 5-V and 3.3-V Linear Regulators
  • APPLICATIONS
    • Notebook PCs, PDAs
    • Consumer Game Systems
    • DSP Applications

The TPS5130 is composed of three independent synchronous buck regulator controllers (SBRC) and one low dropout (LDO) regulator controller. On-chip high-side and low-side synchronous rectifier drivers are integrated to drive less expensive N-channel MOSFETs. The LDO controller can also drive an external N-channel MOSFET. Because the input current ripple is minimized by operating 180° out of phase, it allows a smaller input capacitance, resulting in reduced power supply cost. The SBRC of the TPS5130 automatically adjusts from PWM mode to SKIP mode to maintain high efficiency under light-load conditions. Resistorless current protection for the synchronous buck controller and the fixed high-side driver voltage simplifies the system design and reduces the external parts count. The LDO controller has a current-limit protection and overshoot protection to suppress output voltage spikes at load transient. To further extend battery life, the TPS5130 features dead-time control and very low quiescent current.

The TPS5130 is composed of three independent synchronous buck regulator controllers (SBRC) and one low dropout (LDO) regulator controller. On-chip high-side and low-side synchronous rectifier drivers are integrated to drive less expensive N-channel MOSFETs. The LDO controller can also drive an external N-channel MOSFET. Because the input current ripple is minimized by operating 180° out of phase, it allows a smaller input capacitance, resulting in reduced power supply cost. The SBRC of the TPS5130 automatically adjusts from PWM mode to SKIP mode to maintain high efficiency under light-load conditions. Resistorless current protection for the synchronous buck controller and the fixed high-side driver voltage simplifies the system design and reduces the external parts count. The LDO controller has a current-limit protection and overshoot protection to suppress output voltage spikes at load transient. To further extend battery life, the TPS5130 features dead-time control and very low quiescent current.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet Triple Synchronous Buck Controller with NMOS LDO Controller datasheet 05 mar 2009

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Diseños de referencia

PMP5538 — Diseño de referencia de controlador reductor síncrono triple de 13.1 W con TPS5130-Q1

PMP5538 is a triple buck design using TPS5130-Q1 to generate 3 outputs (1.2V @ 4.9A, 1.8V @ 2.9A and 1V @ 2A).
Test report: PDF
Esquema: PDF
Paquete Pasadores Descargar
LQFP (PT) 48 Ver opciones

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos