Inicio Gestión de la energía Convertidores de CA/CC y CC/CC (FET integrado)
Inicio
Gestión de la energía
Convertidores de CA/CC y CC/CC (FET integrado)
NUEVO

TPS6287B25

ACTIVO

Convertidor reductor síncrono con entrada de 6 V y 25 A en paralelo con opción de sincronización de

Haga su pedido ahora
Hoja de datos

TPS6287B25

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 25 Vin (min) (V) 2.7 Vin (max) (V) 6 Switching frequency (min) (kHz) 1500 Switching frequency (max) (kHz) 3000 Features Adaptive/dynamic voltage scaling, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C, I2C bus interface, I2C control, I2C control method, I2C interface, I2C or GPIO control, I2C support, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start, Spread Spectrum Clocking (SSC), Synchronous Rectification, UVLO, Wettable flanks package Control mode COT, Constant on-time (COT), DCS-Control Vout (min) (V) 0.4 Vout (max) (V) 1.675
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 25 Vin (min) (V) 2.7 Vin (max) (V) 6 Switching frequency (min) (kHz) 1500 Switching frequency (max) (kHz) 3000 Features Adaptive/dynamic voltage scaling, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C, I2C bus interface, I2C control, I2C control method, I2C interface, I2C or GPIO control, I2C support, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start, Spread Spectrum Clocking (SSC), Synchronous Rectification, UVLO, Wettable flanks package Control mode COT, Constant on-time (COT), DCS-Control Vout (min) (V) 0.4 Vout (max) (V) 1.675
WQFN-FCRLF (RZV) 24 12.3525 mm² 3.05 x 4.05
  • Input voltage range: 2.7 V to 6 V
  • Family of pin-to-pin compatible devices: 10 A, 15 A, 20 A, 25 A
  • 3 selectable output voltage ranges from 0.4 V to 1.675 V
    • 0.4 V to 0.71875 V with 1.25-mV steps
    • 0.4 V to 1.0375 V with 2.5-mV steps
    • 0.4 V to 1.675 V with 5-mV steps
  • Output voltage accuracy: ±0.8%
  • Internal power MOSFETs: 2.6 mΩ and 1.5 mΩ
  • Adjustable soft start
  • External compensation
  • Selectable start-up output voltage through the VSET1 and VSET2 pins
    • 0.4 V to 0.775 V with 25 mV of steps
    • 0.8 V to 1.55 V with 50 mV of steps
  • Forced PWM or power-save mode operation
  • Start-up output voltage selection by external resistor or I 2C
  • I 2C-compatible interface with up to 3.4 MHz
  • Optional stacked operation for increased output current capability
  • Differential remote sense
  • Thermal pre-warning and thermal shutdown
  • Output discharge
  • Optional spread spectrum clocking
  • Power-good output with window comparator
  • Input voltage range: 2.7 V to 6 V
  • Family of pin-to-pin compatible devices: 10 A, 15 A, 20 A, 25 A
  • 3 selectable output voltage ranges from 0.4 V to 1.675 V
    • 0.4 V to 0.71875 V with 1.25-mV steps
    • 0.4 V to 1.0375 V with 2.5-mV steps
    • 0.4 V to 1.675 V with 5-mV steps
  • Output voltage accuracy: ±0.8%
  • Internal power MOSFETs: 2.6 mΩ and 1.5 mΩ
  • Adjustable soft start
  • External compensation
  • Selectable start-up output voltage through the VSET1 and VSET2 pins
    • 0.4 V to 0.775 V with 25 mV of steps
    • 0.8 V to 1.55 V with 50 mV of steps
  • Forced PWM or power-save mode operation
  • Start-up output voltage selection by external resistor or I 2C
  • I 2C-compatible interface with up to 3.4 MHz
  • Optional stacked operation for increased output current capability
  • Differential remote sense
  • Thermal pre-warning and thermal shutdown
  • Output discharge
  • Optional spread spectrum clocking
  • Power-good output with window comparator

The TPS6287B10 , TPS6287B15 , TPS6287B20 and TPS6287B25 are a family of pin-to-pin 10-A,15-A, 20-A, 25-A synchronous step-down DC/DC converters with I 2C interface and differential remote sense. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 25-A output current at high ambient temperature.

The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.

The TPS6287Bx family implements an enhanced DCS control scheme that combines fast transient response with fixed-frequency operation. Devices can operate in power-save mode for maximum efficiency, or forced-PWM mode for best transient performance and lowest output voltage ripple.

An optional remote sensing feature maximizes voltage regulation at the point-of-load, and the device achieves ±0.8% DC voltage accuracy for the full output voltage range.

The I 2C compatible interface offers several control, monitoring and warning features, such as voltage monitoring and temperature related warnings. The output voltage can be quickly adjusted to adapt the load´s power consumption to the performance needs. The default start-up voltage is resistor selectable through the VSET1 and VSET2 pins.

The TPS6287B10 , TPS6287B15 , TPS6287B20 and TPS6287B25 are a family of pin-to-pin 10-A,15-A, 20-A, 25-A synchronous step-down DC/DC converters with I 2C interface and differential remote sense. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 25-A output current at high ambient temperature.

The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.

The TPS6287Bx family implements an enhanced DCS control scheme that combines fast transient response with fixed-frequency operation. Devices can operate in power-save mode for maximum efficiency, or forced-PWM mode for best transient performance and lowest output voltage ripple.

An optional remote sensing feature maximizes voltage regulation at the point-of-load, and the device achieves ±0.8% DC voltage accuracy for the full output voltage range.

The I 2C compatible interface offers several control, monitoring and warning features, such as voltage monitoring and temperature related warnings. The output voltage can be quickly adjusted to adapt the load´s power consumption to the performance needs. The default start-up voltage is resistor selectable through the VSET1 and VSET2 pins.
filter Buscar otro/a Convertidores de CA/CC y CC/CC (FET integrado)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Tipo Título Fecha
* Data sheet TPS6287Bxx2.7-V to 6-V Input,10-A,15-A, 20-A, 25-A, Fast Transient Synchronous Step-Down Converter With I2C Interface datasheet PDF | HTML 08 nov 2023
Analog Design Journal Fixed-frequency DCS-Control: Fast transient response with clock synchronization PDF | HTML 12 feb 2024
Application note Power Supply Design for AMD Versal™ AI Edge Series PDF | HTML 29 ene 2024
EVM User's guide TPS6287B25EVM-024 Buck Converter User's Guide PDF | HTML 12 dic 2023
Application note Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B) PDF | HTML 29 nov 2023
Application note Adjusting the Output Voltage of a Fixed Output Voltage DC-DC Converter PDF | HTML 22 dic 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS6287B25EVM-024 — TPS6287B25 evaluation module

The TPS6287B25 evaluation module (EVM) is a platform for evaluating and testing the operation and functionality of the TPS6287Bx buck converters, which includes TPS6287B10, TPS6287B15, TPS6287B20 and TPS6287B25. TPS6287B25EVM-024 converts 2.7V-to-6V input voltage to a regulated 0.4V output voltage. (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Paquete Pasadores Descargar
WQFN-FCRLF (RZV) 24 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos