TPS62901

Name: TPS62901
Brand: TI
SKU: TPS62901
Price: 0.4 USD

ACTIVO

Convertidor reductor de 3 V a 17 V, 1 A, alta eficiencia y baja IQ en encapsulado QFN de 1.5 mm ×

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPS62901 , 3V to 17V, High Efficiency and Low IQ Buck Converter in 1.5mm × 2mm QFN Package datasheet (Rev. A) (Inglés) PDF | HTML

TPS62901

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Operating temperature range (°C)

-40 to 150

Topology

Buck

Type

Converter

Iout (max) (A)

1

Vin (min) (V)

3

Vin (max) (V)

17

Switching frequency (min) (kHz)

1000

Switching frequency (max) (kHz)

2500

Features

Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, Tracking, UVLO adjustable

Control mode

DCS-Control

Vout (min) (V)

0.4

Vout (max) (V)

5.5

Iq (typ) (A)

0.000004

Rating

Catalog

Operating temperature range (°C)

-40 to 150

Topology

Buck

Type

Converter

Iout (max) (A)

1

Vin (min) (V)

3

Vin (max) (V)

17

Switching frequency (min) (kHz)

1000

Switching frequency (max) (kHz)

2500

Features

Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, Tracking, UVLO adjustable

Control mode

DCS-Control

Vout (min) (V)

0.4

Vout (max) (V)

5.5

Iq (typ) (A)

0.000004

VQFN-HR (RPJ)

9

3 mm² 2 x 1.5

High efficiency for wide duty cycle and load range
- IQ: 4µA typical
- Selectable switching frequency of 2.5MHz and 1.0MHz
- RDS(ON): 62mΩ high side, 22mΩ low side
- Automatic efficiency enhancement (AEE)
Small 1.5mm × 2.0mm VQFN package with 0.5mm pitch
Up to 1A continuous output current
±0.9% feedback voltage accuracy across temp (–40°C to 150°C)
Configurable output voltage options:
- VFB external divider: 0.6V to 5.5V
- VSET internal divider: 16 options between 0.4V and 5.5V
DCS-Contro topology with 100% mode
Highly flexible and easy to use
- Optimized pinout for single-layer routing
- Precise enable input
- Forced PWM or auto power save mode
- Power-good output
- Selectable active output discharge
- Adjustable soft start and tracking
No external bootstrap capacitor required
Create a custom design using the TPS62901 using the WEBENCH Power Designer

High efficiency for wide duty cycle and load range
- IQ: 4µA typical
- Selectable switching frequency of 2.5MHz and 1.0MHz
- RDS(ON): 62mΩ high side, 22mΩ low side
- Automatic efficiency enhancement (AEE)
Small 1.5mm × 2.0mm VQFN package with 0.5mm pitch
Up to 1A continuous output current
±0.9% feedback voltage accuracy across temp (–40°C to 150°C)
Configurable output voltage options:
- VFB external divider: 0.6V to 5.5V
- VSET internal divider: 16 options between 0.4V and 5.5V
DCS-Contro topology with 100% mode
Highly flexible and easy to use
- Optimized pinout for single-layer routing
- Precise enable input
- Forced PWM or auto power save mode
- Power-good output
- Selectable active output discharge
- Adjustable soft start and tracking
No external bootstrap capacitor required
Create a custom design using the TPS62901 using the WEBENCH Power Designer

The TPS62901 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5MHz or 1.0MHz allows the use of small inductors and provides fast transient response. The device supports high VOUT accuracy of ±1% with the DCS-Control topology. The wide input voltage range of 3V to 17V supports a variety of nominal inputs like 12V supply rails, single-cell or multi-cell Li-Ion, and 5V or 3.3V rails.

The TPS62901 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4µA. AEE, if enabled, provides high efficiency across VIN, VOUT, and load current. The device includes a MODE/S-CONF input to set the internal and external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 9-pin VQFN package measuring 1.50mm × 2.00mm with 0.5mm pitch.

The TPS62901 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5MHz or 1.0MHz allows the use of small inductors and provides fast transient response. The device supports high VOUT accuracy of ±1% with the DCS-Control topology. The wide input voltage range of 3V to 17V supports a variety of nominal inputs like 12V supply rails, single-cell or multi-cell Li-Ion, and 5V or 3.3V rails.

The TPS62901 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4µA. AEE, if enabled, provides high efficiency across VIN, VOUT, and load current. The device includes a MODE/S-CONF input to set the internal and external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 9-pin VQFN package measuring 1.50mm × 2.00mm with 0.5mm pitch.

open-in-new

Buscar otro/a Convertidores de CA/CC y CC/CC (FET integrado)

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Reemplazo con funcionalidad mejorada del dispositivo comparado

TPS62902

ACTIVO

Convertidor reductor de 3 V a 17 V, 2 A, alta eficiencia y baja IQ en encapsulado QFN de 1.5 mm × Pin-to-pin 2-A output current

TPS62903

ACTIVO

Convertidor reductor de 3 V a 17 V, 3 A, alta eficiencia y baja IQ en encapsulado QFN de 1.5 mm × Pin-to-pin 3-A output current

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 6

	Tipo	Título		Fecha
*	Data sheet	TPS62901 , 3V to 17V, High Efficiency and Low IQ Buck Converter in 1.5mm × 2mm QFN Package datasheet (Rev. A)	PDF \| HTML	23 ene 2024
	Application note	How to Best Use TPS62903 for a Given Application Requirement	PDF \| HTML	13 ago 2021
	Application note	Comparison of TPS6290x vs. TPS621x0	PDF \| HTML	23 jul 2021
	Application brief	Multi-Function Pins for Easy Designing	PDF \| HTML	07 jul 2021
	EVM User's guide	TPS6290x Step-Down Converter Evaluation Module User's Guide (Rev. A)	PDF \| HTML	07 may 2021
	Certificate	TPS62901EVM-069 EU RoHS Declaration of Conformity (DoC)		15 dic 2020

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS62901EVM-069 — Módulo de evaluación de convertidor reductor con entrada de 17 V, 1 A y bajo IQ en encapsulado QFN d

El módulo de evaluación (EVM) TPS62901EVM-069 (BSR069-001) facilita la evaluación del convertidor reductor TPS62901 1 A en un pequeño encapsulado QFN de 1.5 mm por 2 mm. El EVM genera una tensión de salida de 3.3 V a partir de tensiones de entrada de hasta 17 V. El TPS62901 es un convertidor (...)

Guía del usuario: PDF | HTML