TPSM63603E

Name: TPSM63603E
Brand: TI
SKU: TPSM63603E
Price: 11.881 USD

ACTIVO

Módulo de alimentación reductora de 36 V y 3 A en un tamaño reducido de 4 mm x 6 mm x 1.8 mm con un

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPSM63603E High-Density, 3-V to 36-V Input, 1-V to 16-V Output, 3-A Power Module With Extended Temperature Range and Enhanced HotRod™ QFN Package datasheet (Inglés) PDF | HTML

TPSM63603E

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Operating temperature range (°C)

-55 to 125

Iout (max) (A)

3

Vin (max) (V)

36

Vin (min) (V)

3

Vout (max) (V)

16

Vout (min) (V)

1

Topology

Buck, Inverting Buck-Boost, Synchronous Buck

Features

EMI Tested, Enable, Frequency synchronization, Overcurrent protection, Power good, Spread Spectrum

Control mode

current mode

Switching frequency (max) (Hz)

2200000

Switching frequency (min) (Hz)

200000

Rating

Catalog

Operating temperature range (°C)

-55 to 125

Iout (max) (A)

3

Vin (max) (V)

36

Vin (min) (V)

3

Vout (max) (V)

16

Vout (min) (V)

1

Topology

Buck, Inverting Buck-Boost, Synchronous Buck

Features

EMI Tested, Enable, Frequency synchronization, Overcurrent protection, Power good, Spread Spectrum

Control mode

current mode

Switching frequency (max) (Hz)

2200000

Switching frequency (min) (Hz)

200000

B0QFN (RDH)

30

24 mm² 6 x 4

Versatile synchronous buck DC/DC module
- Integrated MOSFETs, inductor, and controller
- Wide input voltage range of 3 V to 36 V
- Adjustable output voltage from 1 V to 16 V
- 4-mm × 6-mm × 1.8-mm overmolded package
- –55°C to 125°C junction temperature range
- Frequency adjustable from 200 kHz to 2.2 MHz using the RT pin or an external SYNC signal
- Negative output voltage capability
Ultra-high efficiency across the full load range
- 93% peak efficiency at 12 V_IN, 5 V_OUT, 1 MHz
- External bias option for improved efficiency
- Shutdown quiescent current of 0.6 µA (typical)
Ultra-low conducted and radiated EMI signatures
- Low-noise package with dual input paths and integrated capacitors reduces switch ringing
- Spread-spectrum modulation
- Resistor-adjustable switch-node slew rate
- Constant-frequency FPWM mode of operation
- Meets CISPR 11 and 32 class B emissions
Suitable for scalable power supplies
- Pin compatible with the TPSM63602 (36 V, 2 A)
Inherent protection features for robust design
- Precision enable input and open-drain PGOOD indicator for sequencing, control, and V_IN UVLO
- Overcurrent and thermal shutdown protections
Create a custom design using the TPSM63603E with the WEBENCH Power Designer

Versatile synchronous buck DC/DC module
- Integrated MOSFETs, inductor, and controller
- Wide input voltage range of 3 V to 36 V
- Adjustable output voltage from 1 V to 16 V
- 4-mm × 6-mm × 1.8-mm overmolded package
- –55°C to 125°C junction temperature range
- Frequency adjustable from 200 kHz to 2.2 MHz using the RT pin or an external SYNC signal
- Negative output voltage capability
Ultra-high efficiency across the full load range
- 93% peak efficiency at 12 V_IN, 5 V_OUT, 1 MHz
- External bias option for improved efficiency
- Shutdown quiescent current of 0.6 µA (typical)
Ultra-low conducted and radiated EMI signatures
- Low-noise package with dual input paths and integrated capacitors reduces switch ringing
- Spread-spectrum modulation
- Resistor-adjustable switch-node slew rate
- Constant-frequency FPWM mode of operation
- Meets CISPR 11 and 32 class B emissions
Suitable for scalable power supplies
- Pin compatible with the TPSM63602 (36 V, 2 A)
Inherent protection features for robust design
- Precision enable input and open-drain PGOOD indicator for sequencing, control, and V_IN UVLO
- Overcurrent and thermal shutdown protections
Create a custom design using the TPSM63603E with the WEBENCH Power Designer

The TPSM63603E synchronous buck power module is a highly integrated 36-V, 3-A DC/DC solution that combines power MOSFETs, a shielded inductor, and passives in an Enhanced HotRod™ QFN package. The module has pins for VIN and VOUT located at the corners of the package for optimized input and output capacitor layout placement. Four larger thermal pads beneath the module enable a simple layout and easy handling in manufacturing.

With an output voltage from 1 V to 16 V, the TPSM63603E is designed to quickly and easily implement a low-EMI design in a small PCB footprint. The total solution requires as few as four external components and eliminates the magnetics and compensation part selection from the design process.

Although designed for small size and simplicity in space-constrained applications, the TPSM63603E module offers many features for robust performance: precision enable with hysteresis for adjustable input-voltage UVLO, resistor-programmable switch node slew rate and spread spectrum option for improved EMI, integrated VCC, bootstrap and input capacitors for increased reliability and higher density, constant switching frequency over the full load current range, and a PGOOD indicator for sequencing, fault protection, and output voltage monitoring.

space

The TPSM63603E synchronous buck power module is a highly integrated 36-V, 3-A DC/DC solution that combines power MOSFETs, a shielded inductor, and passives in an Enhanced HotRod™ QFN package. The module has pins for VIN and VOUT located at the corners of the package for optimized input and output capacitor layout placement. Four larger thermal pads beneath the module enable a simple layout and easy handling in manufacturing.

With an output voltage from 1 V to 16 V, the TPSM63603E is designed to quickly and easily implement a low-EMI design in a small PCB footprint. The total solution requires as few as four external components and eliminates the magnetics and compensation part selection from the design process.

Although designed for small size and simplicity in space-constrained applications, the TPSM63603E module offers many features for robust performance: precision enable with hysteresis for adjustable input-voltage UVLO, resistor-programmable switch node slew rate and spread spectrum option for improved EMI, integrated VCC, bootstrap and input capacitors for increased reliability and higher density, constant switching frequency over the full load current range, and a PGOOD indicator for sequencing, fault protection, and output voltage monitoring.

space

filter

Buscar otro/a Módulos de alimentación (inductor integrado)

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 1

	Tipo	Título		Fecha
*	Data sheet	TPSM63603E High-Density, 3-V to 36-V Input, 1-V to 16-V Output, 3-A Power Module With Extended Temperature Range and Enhanced HotRod™ QFN Package datasheet	PDF \| HTML	28 abr 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPSM63603EVM — Placa de evaluación TPSM63603 de módulo de alimentación con entrada de 3 V a 36 V y salida de 1 V a

La placa de evaluación TPSM63603EVM está configurada para evaluar el funcionamiento del módulo de alimentación TPSM63603. El rango de tensión de entrada es de 3 V a 36 V. El rango de tensión de salida es de 1 V a 16 V. La placa de evaluación facilita evaluar el funcionamiento de TPSM63603.

La placa (...)

Guía del usuario: PDF | HTML

Ver opciones

Paquete	Pasadores	Descargar
B0QFN (RDH)	30	Ver opciones

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

TPSM63603E

Módulo de alimentación reductora de 36 V y 3 A en un tamaño reducido de 4 mm x 6 mm x 1.8 mm con un

TPSM63603E

Detalles del producto

Documentación técnica

Diseño y desarrollo

TPSM63603EVM — Placa de evaluación TPSM63603 de módulo de alimentación con entrada de 3 V a 36 V y salida de 1 V a

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos