NUEVO

TPSM82912

Name: TPSM82912
Brand: TI
SKU: TPSM82912
Price: 1.9 USD

ACTIVO

Módulo reductor de 17 V, 2 A, bajo ruido y baja ondulación con compensación de filtro de ferrita int

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPSM8291x 3-V to 17-V, 2-A/3-A Low-Noise and Low-Ripple Buck Power Module with Integrated Ferrite Bead Filter Compensation datasheet (Rev. C) (Inglés) PDF | HTML

TPSM82912

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck, Synchronous Buck

Type

Module

Iout (max) (A)

2

Vin (min) (V)

3

Vin (max) (V)

17

Vout (min) (V)

0.8

Vout (max) (V)

5.5

Switching frequency (min) (kHz)

1000

Switching frequency (max) (kHz)

2200

Features

Enable, Frequency synchronization, Low Noise, Output discharge, Overcurrent protection, Power good, Remote Sense, Spread Spectrum

Control mode

current mode

Duty cycle (max) (%)

100

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck, Synchronous Buck

Type

Module

Iout (max) (A)

2

Vin (min) (V)

3

Vin (max) (V)

17

Vout (min) (V)

0.8

Vout (max) (V)

5.5

Switching frequency (min) (kHz)

1000

Switching frequency (max) (kHz)

2200

Features

Enable, Frequency synchronization, Low Noise, Output discharge, Overcurrent protection, Power good, Remote Sense, Spread Spectrum

Control mode

current mode

Duty cycle (max) (%)

100

B0QFN (RDU)

28

24.75 mm² 5.5 x 4.5

Low output noise < 20 µV RMS (100 Hz to 100 kHz)
Low output voltage ripple < 10 µV RMS after ferrite bead
High PSRR of > 65 dB (up to 100 kHz)
2.2-MHz or 1-MHz fixed frequency peak current mode control
Synchronizable with external clock (optional)
Integrated loop compensation supports ferrite bead for second stage L-C filter with 30-dB attenuation (optional)
Spread spectrum modulation (optional)
3.0-V to 17-V input voltage range
0.8-V to 5.5-V output voltage range
57-mΩ/20-mΩ R DSon
Output voltage accuracy of ±1%
Precise enable input allows
- User-defined undervoltage lockout
- Exact sequencing
Adjustable soft start
Power-good output
Output discharge (optional)
–40°C to 125°C junction temperature range
- –55°C to 125°C for -ET versions
Create a custom design using the TPSM8291x with the WEBENCH Power Designer

Low output noise < 20 µV RMS (100 Hz to 100 kHz)
Low output voltage ripple < 10 µV RMS after ferrite bead
High PSRR of > 65 dB (up to 100 kHz)
2.2-MHz or 1-MHz fixed frequency peak current mode control
Synchronizable with external clock (optional)
Integrated loop compensation supports ferrite bead for second stage L-C filter with 30-dB attenuation (optional)
Spread spectrum modulation (optional)
3.0-V to 17-V input voltage range
0.8-V to 5.5-V output voltage range
57-mΩ/20-mΩ R DSon
Output voltage accuracy of ±1%
Precise enable input allows
- User-defined undervoltage lockout
- Exact sequencing
Adjustable soft start
Power-good output
Output discharge (optional)
–40°C to 125°C junction temperature range
- –55°C to 125°C for -ET versions
Create a custom design using the TPSM8291x with the WEBENCH Power Designer

The TPSM8291x devices are a family of high-efficiency, low-noise and low-ripple current mode synchronous buck power modules. The devices are ideal for noise sensitive applications that would normally use an LDO for post regulation such as high-speed ADCs, clock and jitter cleaner, serializer, de-serializer, and radar applications.

The devices operate at a fixed switching frequency of 2.2 MHz or 1 MHz and can be synchronized to an external clock.

To further reduce the output voltage ripple, the device integrates loop compensation to operate with an optional second-stage ferrite bead L-C filter. This feature allows an output voltage ripple below 10 µV RMS.

Low-frequency noise levels, similar to a low-noise LDO, are achieved by filtering the internal voltage reference with an integrated capacitor on the NR/SS pin. An external capacitor can be added to the module for additional filtering.

The optional spread spectrum modulation scheme spreads the DC/DC switching frequency over a wider span, which lowers the mixing spurs.

The TPSM8291x devices are a family of high-efficiency, low-noise and low-ripple current mode synchronous buck power modules. The devices are ideal for noise sensitive applications that would normally use an LDO for post regulation such as high-speed ADCs, clock and jitter cleaner, serializer, de-serializer, and radar applications.

The devices operate at a fixed switching frequency of 2.2 MHz or 1 MHz and can be synchronized to an external clock.

To further reduce the output voltage ripple, the device integrates loop compensation to operate with an optional second-stage ferrite bead L-C filter. This feature allows an output voltage ripple below 10 µV RMS.

Low-frequency noise levels, similar to a low-noise LDO, are achieved by filtering the internal voltage reference with an integrated capacitor on the NR/SS pin. An external capacitor can be added to the module for additional filtering.

The optional spread spectrum modulation scheme spreads the DC/DC switching frequency over a wider span, which lowers the mixing spurs.

filter

Buscar otro/a Módulos de alimentación (inductor integrado)

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Pin por pin con la misma funcionalidad que el dispositivo comparado

TPSM82913

ACTIVO

Módulo reductor de 17 VIN, 3 A, bajo ruido y baja ondulación con compensación de filtro de ferrita i Higher current module

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 7

	Tipo	Título		Fecha
*	Data sheet	TPSM8291x 3-V to 17-V, 2-A/3-A Low-Noise and Low-Ripple Buck Power Module with Integrated Ferrite Bead Filter Compensation datasheet (Rev. C)	PDF \| HTML	18 jul 2023
	White paper	Simplifying Power Conversion in High-Voltage Systems	PDF \| HTML	09 nov 2023
	White paper	Simplifying Power Architectures With Low-Noise Power Devices	PDF \| HTML	07 nov 2023
	Application brief	Solving power design challenges in oscilloscope applications	PDF \| HTML	31 oct 2023
	Application brief	Solving Power Design Challenges in Medical Imaging Applications	PDF \| HTML	12 jul 2023
	EVM User's guide	TPSM8291x Step-Down Power Module Evaluation Module User's Guide	PDF \| HTML	05 oct 2022
	Certificate	TPSM82912EVM EU Declaration of Conformity (DoC)		27 sep 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPSM82912EVM — Módulo de evaluación TPSM82912 para módulo reductor de bajo ruido y bajo rizado de 2 A

El módulo de evaluación (EVM) TPSM82912 (BSR213) facilita la evaluación del TPSM82912. Los modelos TPSM82912 y TPSM82913 son módulos de alimentación reductora compatibles pin a pin de bajo nivel de ruido (<20 μVRMS) y ondulación baja (<10 μVRMS) en pequeños encapsulados QFN de 4.5 mm por 5.5 mm. (...)

Guía del usuario: PDF | HTML