Inicio Interfaz Circuitos integrados USB Redrivers y multiplexores USB

TUSB2E22

ACTIVO

Repetidor doble de eUSB2 a USB 2.0

Detalles del producto

Type Redriver Function USB 2.0 USB speed (MBits) 480 Number of channels 2 Supply voltage (max) (V) 1.98, 3.6 Supply voltage (min) (V) 1.62, 3 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 3.6 Configuration Dual-channel Features Full-speed (FS), High-speed (HS) signals, implementation of USB 2.0 and eUSB2 compliance port Support for Low-speed (LS) Rating Catalog Operating temperature range (°C) -20 to 85 ESD HBM (typ) (kV) 1.5 Bandwidth (MHz) 240
Type Redriver Function USB 2.0 USB speed (MBits) 480 Number of channels 2 Supply voltage (max) (V) 1.98, 3.6 Supply voltage (min) (V) 1.62, 3 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 3.6 Configuration Dual-channel Features Full-speed (FS), High-speed (HS) signals, implementation of USB 2.0 and eUSB2 compliance port Support for Low-speed (LS) Rating Catalog Operating temperature range (°C) -20 to 85 ESD HBM (typ) (kV) 1.5 Bandwidth (MHz) 240
DSBGA (YCG) 25 3.0625 mm² 1.75 x 1.75 VQFN-FCRLF (RZA) 20 12.25 mm² 3.5 x 3.5
  • Compliance to USB 2.0 and eUSB2 (rev 1.1)
  • Support for low-speed (LS), full-speed (FS), high-speed (HS)
  • Dual repeater with 2:2 crossbar mux
  • Host and device mode (DRD) support
  • 4 eUSB2 compensation settings to meet different system requirements
  • eUSB2 LS/FS signaling meets 1.2 V option of the eUSB2 interface
  • Compliance to USB 2.0 and eUSB2 (rev 1.1)
  • Support for low-speed (LS), full-speed (FS), high-speed (HS)
  • Dual repeater with 2:2 crossbar mux
  • Host and device mode (DRD) support
  • 4 eUSB2 compensation settings to meet different system requirements
  • eUSB2 LS/FS signaling meets 1.2 V option of the eUSB2 interface

TUSB2E22 enables implementation of USB 2.0 compliance port on newer processors using lower voltage processes.

TUSB2E22 is a USB-compliant eUSB2-USB 2.0 repeater supporting both device and host modes.

TUSB2E22 supports USB low-speed (LS) and full-speed (FS) signals and high-speed (HS) signals.

TUSB2E22 is designed to interface with eUSB2 eDSPr or eUSPr operating at 1.2 V single-ended signaling.

TUSB2E22 has 4 levels of compensation settings through the EQ0 and EQ1 pins. These settings could be used to optimize compensation for different eUSB2 channel loss profiles.

TUSB2E22 enables implementation of USB 2.0 compliance port on newer processors using lower voltage processes.

TUSB2E22 is a USB-compliant eUSB2-USB 2.0 repeater supporting both device and host modes.

TUSB2E22 supports USB low-speed (LS) and full-speed (FS) signals and high-speed (HS) signals.

TUSB2E22 is designed to interface with eUSB2 eDSPr or eUSPr operating at 1.2 V single-ended signaling.

TUSB2E22 has 4 levels of compensation settings through the EQ0 and EQ1 pins. These settings could be used to optimize compensation for different eUSB2 channel loss profiles.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet TUSB2E22eUSB2-USB 2.0 Dual Repeater datasheet (Rev. B) PDF | HTML 09 oct 2023
Application note eUSB2 Repeater Design Guide PDF | HTML 01 dic 2020
EVM User's guide TUSB2E22EVM-CAT User's Guide (Rev. A) 26 nov 2019
Technical article Understanding the embedded USB2 (eUSB2) standard PDF | HTML 19 ago 2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TUSB2E22EVM-CAT — Módulo de evaluación de repetidor de doble canal eUSB2 a USB 2.0

The TUSB2E22EVM-CAT evaluation module (EVM) is used to evaluate the eUSB2 to USB 2.0 repeating function of the TUSB2E22 device for various applications.
Guía del usuario: PDF
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
Paquete Pasadores Descargar
DSBGA (YCG) 25 Ver opciones
VQFN-FCRLF (RZA) 20 Ver opciones

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos