홈 배터리 관리 IC 배터리 충전기 IC
홈
배터리 관리 IC
배터리 충전기 IC

BQ24745

새 설계에 권장하지 않음

여러 배터리 케미스트리를 지원하는 SMBus 최대 4셀 레벨 2 벅 배터리 충전기

지금 주문
데이터시트
BQ24745은(는) 새 설계에 권장하지 않습니다
이 제품은 이전 설계를 지원하기 위해 계속 생산 중이지만 새로운 설계에 사용하는 것은 권장하지 않습니다. 다음 대안 중 하나를 고려하십시오.
open-in-new 대안 비교
비교 대상 장치와 유사한 기능
BQ24725A 활성 N 채널 전력 MOSFET 선택기를 갖춘 SMBus 1~4셀 벅 배터리 충전 컨트롤러 This product is 1-4S Li+ Battery SBMus charger controller

BQ24745

새 설계에 권장하지 않음
데이터시트 지금 주문

제품 상세 정보

Number of series cells 2, 3, 4 Charge current (max) (A) 10 Vin (max) (V) 24 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 24 Absolute max Vin (max) (V) 30 Control topology Switch-Mode Buck Control interface SMBus Features Power Path Vin (min) (V) 7 Rating Catalog Operating temperature range (°C) 0 to 0
Number of series cells 2, 3, 4 Charge current (max) (A) 10 Vin (max) (V) 24 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 24 Absolute max Vin (max) (V) 30 Control topology Switch-Mode Buck Control interface SMBus Features Power Path Vin (min) (V) 7 Rating Catalog Operating temperature range (°C) 0 to 0
VQFN (RHD) 28 25 mm² 5 x 5
  • NMOS-NMOS Synchronous Buck Converter with
    300-kHz Frequency and >95% Efficiency
  • 30-ns Minimum Driver Dead-Time and
    99.5% Maximum Effective Duty Cycle
  • High-Accuracy Voltage and Current Regulation
    • ±0.5% Charge Voltage Accuracy
    • ±3% Charge Current Accuracy
    • ±3% Adapter Current Accuracy
    • ±2% Input Current Sense Amp Accuracy
  • Integration
    • Input Current Comparator, With Adjustable
      Threshold and Hysteresis
    • Internal Soft-Start
  • Safety
    • Dynamic Power Management (DPM)
  • Up to 19.2-V Battery Voltage
  • 7-V–24-V AC/DC-Adapter Operating Range
  • Simplified SMBus Control Interface
    • Charge Voltage DAC (1.024 V–19.2 V)
    • Charge Current DAC (128 mA–8.064 A)
    • Adapter Current Limit DPM DAC
      (256 mA–11.008 A)
  • Status and Monitoring Outputs
    • AC/DC Adapter Present With
      Adjustable Voltage Threshold
    • Input Current Comparator With Adjustable
      Threshold and Hysteresis
    • Current Sense Amplifier for Current Drawn
      From Input Source
  • Charge Any Battery Chemistry: Li+, NiCd,
    NiMH, Lead Acid, Etc.
  • Charge Enable Pin
  • < 10-µA Battery Current With Adapter Removed
  • < 1-mA Input DCIN Current With Adapter
    Present and Charge Disabled
  • 28-Pin, 5-mm × 5-mm QFN Package
  • NMOS-NMOS Synchronous Buck Converter with
    300-kHz Frequency and >95% Efficiency
  • 30-ns Minimum Driver Dead-Time and
    99.5% Maximum Effective Duty Cycle
  • High-Accuracy Voltage and Current Regulation
    • ±0.5% Charge Voltage Accuracy
    • ±3% Charge Current Accuracy
    • ±3% Adapter Current Accuracy
    • ±2% Input Current Sense Amp Accuracy
  • Integration
    • Input Current Comparator, With Adjustable
      Threshold and Hysteresis
    • Internal Soft-Start
  • Safety
    • Dynamic Power Management (DPM)
  • Up to 19.2-V Battery Voltage
  • 7-V–24-V AC/DC-Adapter Operating Range
  • Simplified SMBus Control Interface
    • Charge Voltage DAC (1.024 V–19.2 V)
    • Charge Current DAC (128 mA–8.064 A)
    • Adapter Current Limit DPM DAC
      (256 mA–11.008 A)
  • Status and Monitoring Outputs
    • AC/DC Adapter Present With
      Adjustable Voltage Threshold
    • Input Current Comparator With Adjustable
      Threshold and Hysteresis
    • Current Sense Amplifier for Current Drawn
      From Input Source
  • Charge Any Battery Chemistry: Li+, NiCd,
    NiMH, Lead Acid, Etc.
  • Charge Enable Pin
  • < 10-µA Battery Current With Adapter Removed
  • < 1-mA Input DCIN Current With Adapter
    Present and Charge Disabled
  • 28-Pin, 5-mm × 5-mm QFN Package

The bq24745 is a high-efficiency, synchronous battery charger with an integrated input-current comparator, offering low component count for space-constrained, multi-chemistry battery-charging applications. The input-current, charge-current, and charge-voltage DACs allow very high regulation accuracies that can be easily programmed by the system power-management microcontroller using the SMBus interface. The bq24745 charges two, three, or four series Li+ cells, and is available in a 28-pin, 5-mm × 5 mm QFN package.

The bq24745 features dynamic power management (DPM) and input power limiting. These features reduce battery-charge current when the input power limit is reached to avoid overloading the ac adaptor when supplying the load and the battery charger simultaneously. A highly accurate current-sense amplifier enables precise measurement of input current from the ac adapter, allowing monitoring the overall system power. If the adapter current is above the programmed low-power threshold, a signal is sent to host so that the system optimizes its performance to the power available from the adapter. An integrated comparator monitors the input current through the current-sense amplifier, and indicates when the input current exceeds a programmable threshold limit.

The bq24745 is a high-efficiency, synchronous battery charger with an integrated input-current comparator, offering low component count for space-constrained, multi-chemistry battery-charging applications. The input-current, charge-current, and charge-voltage DACs allow very high regulation accuracies that can be easily programmed by the system power-management microcontroller using the SMBus interface. The bq24745 charges two, three, or four series Li+ cells, and is available in a 28-pin, 5-mm × 5 mm QFN package.

The bq24745 features dynamic power management (DPM) and input power limiting. These features reduce battery-charge current when the input power limit is reached to avoid overloading the ac adaptor when supplying the load and the battery charger simultaneously. A highly accurate current-sense amplifier enables precise measurement of input current from the ac adapter, allowing monitoring the overall system power. If the adapter current is above the programmed low-power threshold, a signal is sent to host so that the system optimizes its performance to the power available from the adapter. An integrated comparator monitors the input current through the current-sense amplifier, and indicates when the input current exceeds a programmable threshold limit.
open-in-new 기타 배터리 충전기 IC 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기4
유형 직함 날짜
* Data sheet SMBus-Controlled Multi-chemistry Battery Charger With Input Current datasheet (Rev. D) 2011/10/05
Application note How to Review a Multicell Switching Charger Schematic 2011/09/21
More literature Журнал по применению аналоговых компонентов 1 кв. 2010 2010/09/23
Analog Design Journal Li-ion battery-charger solutions for JEITA compliance 2010/01/29

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

드라이버 또는 라이브러리

SLUC098 — bq24745 Driver (USB EV2300) Installer

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
배터리 충전기 IC
BQ24745 — 여러 배터리 케미스트리를 지원하는 SMBus 최대 4셀 레벨 2 벅 배터리 충전기
다운로드
지원 소프트웨어

SLUC097 — bq24745EVSWv101

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
배터리 충전기 IC
BQ24745 — 여러 배터리 케미스트리를 지원하는 SMBus 최대 4셀 레벨 2 벅 배터리 충전기
다운로드
레퍼런스 디자인

PMP9668 — 범용 uP 제어 배터리 충전기 24Vin 10 Aout 최대, 5/12V 2A 및 5V 4A, 2 USB 포트 레퍼런스 디자인

BQ24745 is a host controlled synchronous buck battery charger capable of charging batteries at up to 19.2V and up to 8 A normally, extended to 10 A with use of 8 mOhm battery sense resistor. The power train is capable of 8 A with convection only cooling and 10 A with moderate fan cooling (~200 (...)
Test report: PDF
회로도: PDF
패키지 핀 다운로드
VQFN (RHD) 28 옵션 보기
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상