TMUX136

활성

1.4pF 온 상태 커패시턴스, 5V, 2:1(SPDT), 전원 차단 보호 기능이 있는 2채널 아날로그 스위치

지금 주문

데이터시트

document-pdfAcrobat TMUX136 6-GHz, 2-Channel, 2:1 Switch, With Power-Off Isolation datasheet (Rev. E) (영어) PDF | HTML

TMUX136

활성

데이터시트

지금 주문

제품 상세 정보

Configuration

2:1 SPDT

Number of channels

2

Power supply voltage - single (V)

2.5, 3.3

Protocols

Analog, I2C, I3C, LVDS, UART

Ron (typ) (Ω)

4.6

CON (typ) (pF)

1.4

ON-state leakage current (max) (µA)

2

Supply current (typ) (µA)

30

Bandwidth (MHz)

6100

Operating temperature range (°C)

-40 to 125

Features

1.8-V compatible control inputs, Powered-off protection

Input/output continuous current (max) (mA)

20

Rating

Catalog

Drain supply voltage (max) (V)

4.8

Supply voltage (max) (V)

4.8

Configuration

2:1 SPDT

Number of channels

2

Power supply voltage - single (V)

2.5, 3.3

Protocols

Analog, I2C, I3C, LVDS, UART

Ron (typ) (Ω)

4.6

CON (typ) (pF)

1.4

ON-state leakage current (max) (µA)

2

Supply current (typ) (µA)

30

Bandwidth (MHz)

6100

Operating temperature range (°C)

-40 to 125

Features

1.8-V compatible control inputs, Powered-off protection

Input/output continuous current (max) (mA)

20

Rating

Catalog

Drain supply voltage (max) (V)

4.8

Supply voltage (max) (V)

4.8

UQFN (RSE)

10

3 mm² 2 x 1.5

V CC range 2.3 V to 4.8 V
High performance switch characteristics:
- Bandwidth (–3 dB): 6.1 GHz
- R ON (typical): 5.7 Ω
- C ON (typical): 1.6 pF
Current consumption: 30 µA (typical)
Special features:
- I OFF protection prevents current leakage in Powered-Down state
- 1.8-V compatible control inputs (SEL, EN)
Flow-through pinout simplifies PCB layout
Compatible with high-speed I 3C signals
ESD performance:
- 5-kV Human Body Model (A114B, Class II)
- 1-kV Charged-Device Model (C101)
Compact 10-pin UQFN package (1.5-mm × 2-mm, 0.5-mm pitch)

V CC range 2.3 V to 4.8 V
High performance switch characteristics:
- Bandwidth (–3 dB): 6.1 GHz
- R ON (typical): 5.7 Ω
- C ON (typical): 1.6 pF
Current consumption: 30 µA (typical)
Special features:
- I OFF protection prevents current leakage in Powered-Down state
- 1.8-V compatible control inputs (SEL, EN)
Flow-through pinout simplifies PCB layout
Compatible with high-speed I 3C signals
ESD performance:
- 5-kV Human Body Model (A114B, Class II)
- 1-kV Charged-Device Model (C101)
Compact 10-pin UQFN package (1.5-mm × 2-mm, 0.5-mm pitch)

The TMUX136 device is a high performance, 6-GHz, 2-channel, 2:1 switch that will support both differential and single ended signals. The device has a wide V CC range of 2.3 V to 4.8 V and supports a power-off protection feature forcing all I/O pins to be in high-impedance mode when power is not present on the V CC pin. The select pins of TMUX136 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from low voltage processors. The flow-through pinout, where inputs and outputs are on opposite sides of the device, simplifies layout routing . This, along with the low on-resistance and low on-capacitance of the device, make the TMUX136 an optimal device for supporting switching a wide range of analog signals and digital communication protocol standards, including high-speed standards such as I 3C.

The TMUX136 comes in a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it useful when PCB area is limited.

The TMUX136 device is a high performance, 6-GHz, 2-channel, 2:1 switch that will support both differential and single ended signals. The device has a wide V CC range of 2.3 V to 4.8 V and supports a power-off protection feature forcing all I/O pins to be in high-impedance mode when power is not present on the V CC pin. The select pins of TMUX136 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from low voltage processors. The flow-through pinout, where inputs and outputs are on opposite sides of the device, simplifies layout routing . This, along with the low on-resistance and low on-capacitance of the device, make the TMUX136 an optimal device for supporting switching a wide range of analog signals and digital communication protocol standards, including high-speed standards such as I 3C.

The TMUX136 comes in a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it useful when PCB area is limited.

open-in-new

기타 아날로그 스위치 및 멀티플렉서 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

TI.com 재고에서 유사한 제품 확인

유사한 사양 제품, 주문 가능한 TI.com 재고별로 정렬.

지금 보기

기술 문서

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

모두 보기9

	유형	직함		날짜
*	Data sheet	TMUX136 6-GHz, 2-Channel, 2:1 Switch, With Power-Off Isolation datasheet (Rev. E)	PDF \| HTML	2023/06/05
	Application note	Designing with Multiple Multiplexers in Series: A Guide to Cascading Multiplexers	PDF \| HTML	2024/01/31
	Application brief	Important Multiplexer Characteristics for I3C Applications	PDF \| HTML	2023/07/27
	Application brief	Best Practices: I2C Devices on an I3C Shared Bus	PDF \| HTML	2023/03/30
	Application brief	1.8-V Logic for Multiplexers and Signal Switches (Rev. C)	PDF \| HTML	2022/07/26
	Application note	Selecting the Correct Texas Instruments Signal Switch (Rev. E)	PDF \| HTML	2022/06/02
	Application note	Multiplexers and Signal Switches Glossary (Rev. B)	PDF \| HTML	2021/12/01
	Application brief	Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C)	PDF \| HTML	2021/01/06
	Application brief	Improve Stability Issues with Low Con Multiplexers (Rev. A)		2018/12/10

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

인터페이스 어댑터

LEADLESS-ADAPTER1 — TI의 6, 8, 10, 12, 14, 16 및 20핀 리드 없는 패키지의 테스트를 위한 DIP 헤더 어댑터에 대한 표면 실장

The EVM-LEADLESS1 board allows for quick testing and bread boarding of TI's common leadless packages. The board has footprints to convert TI's DRC, DTP, DQE, RBW, RGY, RSE, RSV, RSW RTE, RTJ, RUK , RUC, RUG, RUM,RUT and YZP surface mount packages to 100mil DIP headers.

사용 설명서: PDF