TPD8E003
- IEC 61000-4-2 Level 4 ESD Protection
- ±12-kV Contact Discharge
- ±15-kV Air-Gap Discharge
- IEC 61000-4-5 Surge Protection
- 3.5-A (8/20 µs)
- IO Capacitance: 9 pF (Typical)
- DC Breakdown Voltage: 6 V (Minimum)
- Low Leakage Current: 100 nA (Maximum)
- Industrial Temperature Range: –40°C to 85°C
- Space-Saving, Ultra-Thin, WSON Package
- APPLICATIONS
- End Equipment
- Laptops and Desktops
- IP Phones
- Interfaces
- Keypads
- GPIO Headers
- Touchscreens
- Low-Speed Memory Interfaces
- End Equipment
All other trademarks are the property of their respective owners
The TPD8E003 device is a unidirectional Transient Voltage Suppressor (TVS) based Electrostatic Discharge (ESD) protection diode array. The TPD8E003 is rated to dissipate ESD strikes above the maximum level specified in the IEC 61000-4-2 international standard (Level 4). This device provides 8 channels of ESD protection in a space-saving WSON package. Typical applications for the TPD8E003 include Keypad, GPIO, resistive touchscreen, and low-speed memory interfaces. Also, see the TPD2E2U06 and TPD4E05U06 for 2- and 4-channel ESD protection solutions, respectively.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | TPD8E003 8-Channel ESD Protection Diode for Keypad and GPIO datasheet (Rev. B) | PDF | HTML | 2016/03/31 |
Application brief | ESD Protection for GPIO | PDF | HTML | 2024/01/08 | |
User guide | Reading and Understanding an ESD Protection Data Sheet (Rev. A) | PDF | HTML | 2023/09/19 | |
Application note | ESD Protection Layout Guide (Rev. A) | PDF | HTML | 2022/04/07 | |
User guide | Generic ESD Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2021/09/27 | |
Analog Design Journal | Design Considerations for System-Level ESD Circuit Protection | 2012/09/25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ESDEVM — 일반 ESD 평가 모듈
<p>The electrostatic-sensitive device (ESD) evaluation module (EVM) is a development platform for most of our ESD portfolio. The board comes with all traditional ESD footprints in order to test any number of devices. Devices can be soldered onto their respect footprint and then tested.</p>
(...)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
TIDM-ULTRASONIC-FLOW-TDC — 시간-디지털 변환을 사용하는 초음파 유량계 설계
TIDA-01373 — EEPROM 프로그래밍 툴 레퍼런스 디자인
TIDA-00079 — 클래스 1 PoE - 고효율 IP 카메라 전원 모듈 레퍼런스 디자인
패키지 | 핀 | 다운로드 |
---|---|---|
WSON (DQD) | 8 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.