BQ24041
- Charging
- 1% Charge voltage accuracy
- 10% Charge current accuracy
- Pin selectable USB 100 mA and 500 mA maximum input current limit
- Programmable termination and precharge threshold, BQ24040 and BQ24045
- High voltage (4.35 V) chemistry support with BQ24045
- Protection
- 30V Input rating; with 6.6 V or 7.1 V input overvoltage protection
- Input voltage dynamic power management
- 125°C thermal regulation; 150°C thermal shutdown protection
- OUT Short-circuit protection and ISET short detection
- Operation over JEITA range via battery NTC – 1/2 fast-charge-current at Cold, 4.06V at Hot, BQ24040 and BQ24045
- Fixed 10 hour safety timer, BQ24040 and BQ24045
- System
- Automatic termination and timer disable mode (TTDM) for absent battery pack with thermistor, BQ24040 and BQ24045
- Status indication – charging and done
- Available in small 2 × 2 mm2 DFN-10 package
- Integrated auto start function for production line testing, BQ24041
- Functional Safety-Capable (BQ24040)
- Safety-Related Certifications:
- IEC 62368-1 CB Certification (BQ24040, BQ24045)
The BQ2404x series of devices are highly integrated Li-Ion and Li-Pol linear chargers devices targeted at space-limited portable applications. The devices operate from either a USB port or AC adapter. The high input voltage range with input overvoltage protection supports low-cost unregulated adapters.
The BQ2404x has a single power output that charges the battery. A system load can be placed in parallel with the battery as long as the average system load does not keep the battery from charging fully during the 10 hour safety timer.
The battery is charged in three phases: conditioning, constant current and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if an internal temperature threshold is exceeded.
The charger power stage and charge current sense functions are fully integrated. The charger function has high accuracy current and voltage regulation loops, charge status display, and charge termination. The pre-charge current and termination current threshold are programmed through an external resistor on the BQ24040 and BQ24045. The fast charge current value is also programmable through an external resistor.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | BQ2404x 1A, Single-Input, Single Cell Li-Ion and Li-Pol Battery Charger datasheet (Rev. H) | 2021年 2月 1日 | |
| Application note | BQ2404x, BQ2405x, and BQ2409x Frequently Asked Questions | 2019年 2月 25日 | ||
| Application note | Building your own Battery Simulator | 2013年 10月 14日 | ||
| User guide | 1-A Single-Input, Single-Cell Li-Ion Battery Charger | 2012年 12月 31日 | ||
| Application note | Selecting the Best bq2404x/5x/9x Single Cell Battery Charger for your Applicatio | 2012年 11月 29日 | ||
| User guide | 0.8-A, Single-Input Single-Cell Li-Ion Battery Charger UG | 2009年 9月 29日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
BQ24041EVM — BQ24041 評估模組：1A 單輸入單芯鋰離子電池充電器
The bq2404x series of devices are highly integrated Li-ion linear charger devices targeted at space-limited portable applications. The devices operate from either a USB port or AC adapter.The bq2404x has a single power output that charges the battery. A system load can be placed in parallel with (...)
| 封裝 | 引腳 | 下載 |
|---|---|---|
| WSON (DSQ) | 10 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。