CC2570
- RF Section
- Single-Chip 2.4-GHz Radio, Including Embedded ANT Protocol
- Excellent Link Budget, Enabling Long Range Without External Front-Ends
- Excellent Output Power (4 dBm)
- Suitable for Systems Targeting Compliance With Worldwide Radio Frequency
Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47
Part 15 (US), and ARIB STD-T66 (Japan) - Accurate Full-Range RSSI Function, Especially Suited for Accurate Proximity Pairing
- Layout
- Few External Components
- Reference Designs Available
- 40-Pin, 6-mm × 6-mm QFN Package
- Low Power
- Powered Down With Low-Power Times: 1 µA
- Powered Down Without Timer: 0.5 µA
- Wide Supply Voltage Range (2 V–3.6 V)
- ANT Protocol Support
- Fully Compatible With the ANT and ANT+™ Protocols and Existing ANT Devices
- Built-In ANT-FS™ Support
- Easy Connection to Host MCU Through Asynchronous or Synchronous Serial Interface
- CC2570 Supports One ANT Channel
- CC2571 Supports Eight ANT Channels
- Support for Both Public, Private and Managed ANT Networks
- Support for High-Resolution Proximity Pairing
- APPLICATIONS
- Sports and Fitness Equipment
- Health and Medical Equipment
- Consumer Health Devices
- Consumer Electronics
ANT, ANT-FS are trademarks of Dynastream Innovations Inc.
The CC2570 and CC2571 are ANT RF network processors that implement the easy-to-use, power-efficient ANT protocol. The CC2570 supports one ANT channel, whereas the CC2571 supports eight ANT channels. The CC2570/71 can be connected to a host MCU (such as an MSP430) through a UART or SPI serial interface and accessed through a set of API calls. The majority of the ANT protocol is built into the CC2570/71, including the ANT-FS file system functionality; only the application and profile layers must reside on the host MCU, thus keeping host MCU memory requirements to a minimum.
The ANT protocol has been designed to be very power-efficient, yet is flexible enough to support various network topologies (point-to-point, star, connected star, 1-to-N, and N-to-1) and data transfer modes (broadcast, acknowledged, burst data transfer). Each logical ANT channel can be independently configured for one-way or two-way operation, depending on requirements of the application.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | CC2570, CC2571 1- and 8-channel ANT™ RF Network Processors datasheet (Rev. A) | 2011年 3月 16日 | |
| Application note | AN081 -- Johanson Technology Balun Optimized for CC253X, CC254X, CC257X, CC853X (Rev. B) | 2012年 11月 6日 | ||
| Application note | AN107 - Murata Balun for CC253x and CC254x, LFB182G45BG2D280 (Rev. A) | 2011年 10月 26日 | ||
| More literature | Ant Brochure | 2010年 9月 20日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
| 封裝 | 引腳 | 下載 |
|---|---|---|
| VQFN (RHA) | 40 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點