Meets EIA Standards RS232-C, RS422 and RS423, Federal Standards 1020, 1030 and MIL-188-114
Input Voltage Range of ±15V (Differential or Common-mode)
Separate Strobe Input for Each Receiver
5k Typical Input Impedance
Optional 180Ω Termination Resistor
50mV Input Hysteresis
200mV Input Threshold
Separate Fail-safe Mode

All trademarks are the property of their respective owners.

Meets EIA Standards RS232-C, RS422 and RS423, Federal Standards 1020, 1030 and MIL-188-114
Input Voltage Range of ±15V (Differential or Common-mode)
Separate Strobe Input for Each Receiver
5k Typical Input Impedance
Optional 180Ω Termination Resistor
50mV Input Hysteresis
200mV Input Threshold
Separate Fail-safe Mode

All trademarks are the property of their respective owners.

The DS78LS120QML is a high performance, dual differential, TTL compatible line receiver for both balanced and unbalanced digital data transmission. The inputs are compatible with EIA, Federal and MIL standards.

The line receiver will discriminate a ±200 mV input signal over a common-mode range of ±10V and a ±300 mV signal over a range of ±15V.

Circuit features include hysteresis and response control for applications where controlled rise and fall times and/or high frequency noise rejection are desirable. Threshold offset control is provided for fail-safe detection, should the input be open or short. Each receiver includes an optional 180Ω terminating resistor and the output gate contains a logic strobe for time discrimination. The DS78LS120QML is specified over a −55°C to +125°C temperature range.

Input specifications meet or exceed those of the popular DS7820 line receiver.

The DS78LS120QML is a high performance, dual differential, TTL compatible line receiver for both balanced and unbalanced digital data transmission. The inputs are compatible with EIA, Federal and MIL standards.

The line receiver will discriminate a ±200 mV input signal over a common-mode range of ±10V and a ±300 mV signal over a range of ±15V.

Circuit features include hysteresis and response control for applications where controlled rise and fall times and/or high frequency noise rejection are desirable. Threshold offset control is provided for fail-safe detection, should the input be open or short. Each receiver includes an optional 180Ω terminating resistor and the output gate contains a logic strobe for time discrimination. The DS78LS120QML is specified over a −55°C to +125°C temperature range.

Input specifications meet or exceed those of the popular DS7820 line receiver.

filter

尋找其它 RS-232 收發器

下載觀看有字幕稿的影片影片

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 1

	類型	標題		日期
*	Data sheet	DS78LS120/QML Dual Differential Line Receiver (Noise Filtering and Fail-Safe) datasheet (Rev. C)		2013年 4月 15日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

要求

模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

使用指南: PDF

檢視選項

封裝	引腳	下載
CDIP (NFE)	16	檢視選項

適用 TI 的評估品項標準條款與條件。

DS78LS120QML

雙差動線路接收器 (雜訊過濾和故障安全)

DS78LS120QML

產品詳細資料

技術文件

設計與開發

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

影片系列

影片