ISO7640FM
- Signaling Rate: 150 Mbps
- Low Power Consumption, Typical ICC per Channel
(3.3-V Supplies):- ISO7640FM: 2 mA at 25 Mbps
- ISO7641FM: 2.4 mA at 25 Mbps
- Low Propagation Delay: 7-ns Typical
- Output Defaults to Low-State in Fail-
Safe Mode - Wide Temperature Range: –40°C to 125°C
- 50-KV/µs Transient Immunity, Typical
- Long Life With SiO2 Isolation
Barrier - Operates From 2.7-V, 3.3-V, and 5-V Supply and
Logic Levels - Wide Body SOIC-16 Package
- Safety and Regulatory Approvals
- 6000 VPK / 4243 VRMS for 1 Minute per UL
1577 - VDE 6000 VPK Transient Overvoltage, 1414
VPK Working Voltage
per DIN V VDE V 0884-10 (VDE V 0884-
10):2006-12 - CSA Component Acceptance Notice 5A, IEC
60950-1, IEC 61010-1, and IEC 60601-1 End
Equipment Standards - TUV 5 KVRMS Reinforced Insulation per
EN/UL/CSA 60950-1 and EN/UL/CSA 61010-1 - CQC Reinforced Insulation per GB4943.1-
2011
- 6000 VPK / 4243 VRMS for 1 Minute per UL
ISO7640FM and ISO7641FM provide galvanic isolation up to 6 KVPK for 1 minute per UL and VDE. These devices are also certified up to 5-KVRMS Reinforced isolation at a working voltage of 400 VRMS per end equipment standards EN/UL/CSA 60950-1 and 61010-1. ISO7640F and ISO7641F are quad-channel isolators; ISO7640F has four forward and ISO7641F has three forward and one reverse-direction channels. Suffix F indicates that output defaults to Low-state in fail-safe conditions. M-Grade devices are high-speed isolators capable of 150-Mbps data rate with fast propagation delays.
Each isolation channel has a logic input and output buffer separated by a silicon dioxide (SiO2) insulation barrier. Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. The devices have TTL input thresholds and can operate from 2.7-V, 3.3-V, and 5-V supplies. All inputs are 5-V tolerant when supplied from 3.3-V or 2.7-V supplies.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | ISO764xFM Low-Power Quad-Channel Digital Isolators datasheet (Rev. G) | PDF | HTML | 2015年 1月 29日 |
| Certificate | VDE Certificate for Basic Isolation for DIN EN IEC 60747-17 (Rev. W) | 2024年 1月 31日 | ||
| White paper | Improve Your System Performance by Replacing Optocouplers with Digital Isolators (Rev. C) | PDF | HTML | 2023年 9月 7日 | |
| Certificate | CSA Certificate for ISO76xxDW | 2023年 3月 3日 | ||
| Certificate | CQC Certificate for ISO752xDW, ISO76xxDW (Rev. A) | 2023年 2月 7日 | ||
| Certificate | ISO76x, ISO75xx TUV Certificate | 2022年 8月 8日 | ||
| Certificate | UL Certificate of Compliance File E181974 Vol 4 Sec 4 | 2022年 8月 8日 | ||
| White paper | Why are Digital Isolators Certified to Meet Electrical Equipment Standards? | 2021年 11月 16日 | ||
| White paper | Distance Through Insulation: How Digital Isolators Meet Certification Requiremen | PDF | HTML | 2021年 6月 11日 | |
| EVM User's guide | Universal Digital Isolator Evaluation Module | PDF | HTML | 2021年 3月 4日 | |
| Application brief | Considerations for Selecting Digital Isolators | 2018年 7月 24日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
DIGI-ISO-EVM — 通用數位隔離器評估模組
DIGI-ISO-EVM 是一款評估模組 (EVM)，可評估任何 TI 單通道、雙通道、三通道、四通道或六通道數位隔離器裝置，並提供五種不同封裝 - 8 接腳窄體 SOIC (D)、8 接腳寬體 SOIC (DWV)、16 接腳寬體 SOIC (DWW)、16 接腳超寬體 SOIC (DWW) 和 16 接腳 (DBQ) 封裝。EVM 具備足夠 Berg 接腳選項，可用於評估具最少外部零組件的裝置。
ISO723X724XEVM — ISO723X724XEVM 評估模組
The ISO723X724X evaluation module (EVM) supports the rapid, parametric evaluation of the Triple and Quad Digital Isolators. The EVM will be delivered with an ISO7241C soldered on the board. If another device is desired, please order samples from www.ti.com. If you do not have the capability to (...)
TIDA-00440 — 用於判斷絕緣電阻的漏電流量測參考設計
TIDA-00106 — 隔離以實現高壓共態抑制的 16 位元 1 MSPS 資料採集參考設計
| 封裝 | 引腳 | 下載 |
|---|---|---|
| SOIC (DW) | 16 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。