LM3475

現行

10-V 磁滯 PFET 降壓控制器

產品詳細資料

Vin (min) (V) 2.7 Vin (max) (V) 10 Iout (max) (A) 5 Operating temperature range (°C) -40 to 125 Control mode Hysteretic Rating Catalog Vout (min) (V) 0.8 Vout (max) (V) 10 Iq (typ) (A) 0.00026 Duty cycle (max) (%) 100 Number of phases 1
Vin (min) (V) 2.7 Vin (max) (V) 10 Iout (max) (A) 5 Operating temperature range (°C) -40 to 125 Control mode Hysteretic Rating Catalog Vout (min) (V) 0.8 Vout (max) (V) 10 Iq (typ) (A) 0.00026 Duty cycle (max) (%) 100 Number of phases 1
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • Easy-to-Use Control Methodology
  • 0.8 V to VIN Adjustable Output Range
  • High Efficiency (90% Typical)
  • ±0.9% (±1.5% Over Temperature) Feedback
    Voltage
  • 100% Duty Cycle Capable
  • Maximum Operating Frequency up to 2 MHz
  • Internal Soft-Start
  • Enable Pin
  • Easy-to-Use Control Methodology
  • 0.8 V to VIN Adjustable Output Range
  • High Efficiency (90% Typical)
  • ±0.9% (±1.5% Over Temperature) Feedback
    Voltage
  • 100% Duty Cycle Capable
  • Maximum Operating Frequency up to 2 MHz
  • Internal Soft-Start
  • Enable Pin

The LM3475 is a hysteretic P-FET buck controller designed to support a wide range of high efficiency applications in a very small SOT-23-5 package. The hysteretic control scheme has several advantages, including simple system design with no external compensation, stable operation with a wide range of components, and extremely fast transient response. Hysteretic control also provides high efficiency operation, even at light loads. The PFET architecture allows for low component count as well as 100% duty cycle and ultra-low dropout operation.

The LM3475 is a hysteretic P-FET buck controller designed to support a wide range of high efficiency applications in a very small SOT-23-5 package. The hysteretic control scheme has several advantages, including simple system design with no external compensation, stable operation with a wide range of components, and extremely fast transient response. Hysteretic control also provides high efficiency operation, even at light loads. The PFET architecture allows for low component count as well as 100% duty cycle and ultra-low dropout operation.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 7
類型 標題 日期
* Data sheet LM3475 Hysteretic PFET Buck Controller datasheet (Rev. C) PDF | HTML 2015年 10月 31日
Analog Design Journal Control-Mode Quick Reference Guide (Rev. B) PDF | HTML 2023年 8月 29日
User guide LM3475 Buck Controller Evaluation Module User's Guide (Rev. B) PDF | HTML 2022年 2月 9日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
User guide PMLK Buck Experiment Book (Rev. B) 2017年 4月 21日
User guide Cost Effective Test Methods Using PMLK BUCK Boards (Rev. A) 2016年 8月 31日
User guide PMLK Buck Experiment Book (Rev. A) 2016年 8月 31日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM3475EVAL — 磁滯 PFET 降壓控制器

The LM3475 evaluation board is provided as a tool for developing DC/DC converters based on the LM3475 IC. As shown in Figure 1, the evaluation board is configured to provide an output of 2.5V at up to 2A from an input up to 10V. The corresponding bill of material is given in Table 1. Typical (...)

使用指南: PDF | HTML
TI.com 無法提供
開發板

PMLKBUCKEVM — 使用 TPS54160 和 LM3475 的 TI-PMLK 降壓實驗電路板

The TI-PMLK Buck Experiment Board is part of the TI Power Management Lab Kit (TI-PMLK) series. TI-PMLK series provides hands on learning to reinforce power supply knowledge. The modular format allows users to customize the TI-PMLK series experience in a way that makes the most impact on (...)

使用指南: PDF
TI.com 無法提供
封裝 引腳 下載
SOT-23 (DBV) 5 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片